Pepperl+Fuchs NJ20+U1+E2-Y287109
Inductive sensor
- Comfort series
- 20 mm flush
- Overview
- Comments
Connection typescrew terminals. Products with an operating voltage ≤36 V are not subject to this approval and therefore do not carry the CCC mark.
| Switching function | Normally open (NO) |
| Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
| Operating current | 0 ... 200 mA |
| Hysteresis | 1 ... 10 typ. 5 % |
| Installation | flush |
| UL approval | cULus Listed, General Purpose |
| No-load supply current | ≤ 10 mA |
| Rated operating distance | 20 mm |
| Reverse polarity protection | reverse polarity protected |
| Degree of protection | IP68 |
| Actual operating distance | 18 ... 22 mm typ. 20 mm |
| Short-circuit protection | pulsing |
| Mission Time (TM) | 20 a |
| Switching frequency | 0 ... 150 Hz |
| Information for connection | A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 % |
| Operating voltage indicator | LED, green |
| Housing material | PBT with Viton seals and PVDF screwed connection |
| Switching state indicator | LED, yellow |
| Off-state current | 0 ... 0.5 mA typ. 0.01 mA |
| Output type | PNP |
| Reduction factor r304 | 0.8 |
| Diagnostic Coverage (DC) | 0 % |
| Sensing face | PBT |
| Reduction factor rAl | 0.35 |
| Output polarity | DC |
| Storage temperature | -25 ... 85 В°C (-13 ... 185 В°F) |
| Voltage drop | ≤ 2.8 V |
| Core cross-section | up to 2.5 mm2 |
| Operating voltage | 10 ... 30 V |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| MTTFd | 819 a |
| Reduction factor rCu | 0.35 |
| Assured operating distance | 0 ... 16.2 mm |
Comments
No comments yet