Pepperl+Fuchs NJ4-12GM40-E2-10M Inductive sensor
Item Number: NJ4-12GM40-E2-10M
- 4 mm non-flush
- Overview
- Datasheet
- Alternative numbers
- Comments
| Scope of delivery | 2 self locking nuts in scope of delivery |
| Operating voltage | 10 ... 60 V |
| Reduction factor r304 | 0.74 |
| Switching state indicator | LED, yellow |
| Diagnostic Coverage (DC) | 0 % |
| Installation | non-flush |
| Voltage drop | ≤ 3 V |
| Reduction factor rCu | 0.36 |
| CSA approval | cCSAus Listed, General Purpose |
| Core cross-section | 0.34 mm2 |
| Mission Time (TM) | 20 a |
| Switching frequency | 0 ... 2000 Hz |
| Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
| Rated operating distance | 4 mm |
| Assured operating distance | 0 ... 3.24 mm |
| Degree of protection | IP67 |
| CCC approval | Certified by China Compulsory Certification (CCC) |
| Operating current | 0 ... 200 mA |
| Connection type | cable PUR , 10 m |
| Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
| Switching function | Normally open (NO) |
| MTTFd | 750 a |
| No-load supply current | ≤ 9 mA |
| Off-state current | ≤ 0.5 mA |
| Housing material | Stainless steel 1.4305 / AISI 303 |
| Reverse polarity protection | reverse polarity protected |
| UL approval | cULus Listed, General Purpose |
| Short-circuit protection | pulsing |
| Hysteresis | 1 ... 10 typ. 3 % |
| Housing diameter | 12 mm |
| Output polarity | DC |
| Actual operating distance | 3.6 ... 4.4 mm typ. |
| Sensing face | PBT |
| Reduction factor rAl | 0.37 |
| Output type | PNP |
Comments
No comments yet