Pepperl+Fuchs NJ5-11-N-G-Y317937 Inductive sensor
Item Number: NJ5-11-N-G-Y317937
- 5 mm non-flush
- Overview
- Datasheet
- Alternative numbers
- Comments
| Ambient temperature | -25 ... 100 В°C (-13 ... 212 В°F) |
| Switching frequency | 0 ... 3000 Hz |
| Equipment protection level | Gb , Gc (ic) , Da , Mb |
| Output type | NAMUR |
| MTTFd | 11774 a |
| Effective internal capacitance | max. 45 nF A cable length of 10 m is considered. |
| Type of protection | intrinsic safety |
| Degree of protection | IP68 |
| Effective internal capacitance | max. 45 nF A cable length of 10 m is considered. |
| Reduction factor rAl | 0.4 |
| CE marking | [*PD-Z02585A*] |
| CE marking | [*PD-Z02585A*] |
| Type of protection | intrinsic safety |
| Diagnostic Coverage (DC) | 0 % |
| UL approval | cULus Listed, General Purpose |
| EAC conformity | TR CU 012/2011 |
| Maximum permissible ambient temperature | Also observe the maximum permissible ambient temperature stated in the general technical data. Keep to the lower of the two values. at Ui = 16 V , Ii = 25 mA , Pi = 34 mW : 100 В°C (212 В°F) at Ui = 16 V , Ii = 25 mA , Pi = 64 mW : 100 В°C (212 В°F) at Ui = 16 V , Ii = 52 mA , Pi = 169 mW : 82 В°C (179.6 В°F) at Ui = 16 V , Ii = 76 mA , Pi = 242 mW : 63 В°C (145.4 В°F) |
| Maximum permissible ambient temperature | Also observe the maximum permissible ambient temperature stated in the general technical data. Keep to the lower of the two values. at Ui = 20 V , Ii = 25 mA , Pi = 34 mW , T6 : 55 В°C (131 В°F) T5 : 55 В°C (131 В°F) T4 : 55 В°C (131 В°F) T3 : 55 В°C (131 В°F) T2 : 55 В°C (131 В°F) T1 : 55 В°C (131 В°F) at Ui = 20 V , Ii = 25 mA , Pi = 64 mW , T6 : 55 В°C (131 В°F) T5 : 55 В°C (131 В°F) T4 : 55 В°C (131 В°F) T3 : 55 В°C (131 В°F) T2 : 55 В°C (131 В°F) T1 : 55 В°C (131 В°F) at Ui = 20 V , Ii = 52 mA , Pi = 169 mW , T6 : 32 В°C (89.6 В°F) T5 : 32 В°C (89.6 В°F) T4 : 32 В°C (89.6 В°F) T3 : 32 В°C (89.6 В°F) T2 : 32 В°C (89.6 В°F) T1 : 32 В°C (89.6 В°F) at Ui = 20 V , Ii = 76 mA , Pi = 242 mW , T6 : 16 В°C (60.8 В°F) T5 : 16 В°C (60.8 В°F) T4 : 16 В°C (60.8 В°F) T3 : 16 В°C (60.8 В°F) T2 : 16 В°C (60.8 В°F) T1 : 16 В°C (60.8 В°F) |
| Core cross-section | 0.34 mm2 |
| Maximum permissible ambient temperature | Also observe the maximum permissible ambient temperature stated in the general technical data. Keep to the lower of the two values. at Ui = 16 V , Ii = 25 mA , Pi = 34 mW , T6 : 72 В°C (161.6 В°F) T5 : 87 В°C (188.6 В°F) T4 : 100 В°C (212 В°F) T3 : 100 В°C (212 В°F) T2 : 100 В°C (212 В°F) T1 : 100 В°C (212 В°F) at Ui = 16 V , Ii = 25 mA , Pi = 64 mW , T6 : 65 В°C (149 В°F) T5 : 80 В°C (176 В°F) T4 : 100 В°C (212 В°F) T3 : 100 В°C (212 В°F) T2 : 100 В°C (212 В°F) T1 : 100 В°C (212 В°F) at Ui = 16 V , Ii = 52 mA , Pi = 169 mW , T6 : 42 В°C (107.6 В°F) T5 : 57 В°C (134.6 В°F) T4 : 82 В°C (179.6 В°F) T3 : 82 В°C (179.6 В°F) T2 : 82 В°C (179.6 В°F) T1 : 82 В°C (179.6 В°F) at Ui = 16 V , Ii = 76 mA , Pi = 242 mW , T6 : 26 В°C (78.8 В°F) T5 : 41 В°C (105.8 В°F) T4 : 63 В°C (145.4 В°F) T3 : 63 В°C (145.4 В°F) T2 : 63 В°C (145.4 В°F) T1 : 63 В°C (145.4 В°F) |
| Assured operating distance | 0 ... 4.05 mm |
| Rated operating distance | 5 mm |
| Housing material | Stainless steel 1.4305 / AISI 303 |
| Hysteresis | typ. 5 % |
| Mission Time (TM) | 20 a |
| CE marking | [*PD-Z02586A*] |
| Effective internal inductance | max. 50 µH A cable length of 10 m is considered. |
| Suitable for 2:1 technology | yes , Reverse polarity protection diode not required |
| Effective internal inductance | max. 50 µH A cable length of 10 m is considered. |
| Switching function | Normally closed (NC) |
| Type of protection | intrinsic safety |
| Type of protection | intrinsic safety |
| Use in the hazardous area | see instruction manuals |
| Maximum permissible ambient temperature | Also observe the maximum permissible ambient temperature stated in the general technical data. Keep to the lower of the two values. at Ui = 16 V , Ii = 25 mA , Pi = 34 mW : 100 В°C (212 В°F) at Ui = 16 V , Ii = 25 mA , Pi = 64 mW : 100 В°C (212 В°F) at Ui = 16 V , Ii = 52 mA , Pi = 169 mW : 82 В°C (179.6 В°F) at Ui = 16 V , Ii = 76 mA , Pi = 242 mW : 63 В°C (145.4 В°F) |
| Sensing face | PVDF |
| Installation | non-flush |
| Effective internal inductance | max. 50 µH A cable length of 10 m is considered. |
| Connection type | cable PUR , 2 m |
| Effective internal capacitance | max. 45 nF A cable length of 10 m is considered. |
| Nominal voltage | 8.2 V (Ri approx. 1 kΩ) |
| Reduction factor rCu | 0.3 |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Effective internal capacitance | max. 45 nF A cable length of 10 m is considered. |
| Output type | 2-wire |
| Effective internal inductance | max. 50 µH A cable length of 10 m is considered. |
| Reduction factor r304 | 0.85 |
Comments
No comments yet