Pepperl+Fuchs NJ60-FP-A2-P1-Y237069
Inductive sensor
- 60 mm non-flush
- Detects stainless steel tubes in bottles
- Steam restistant
- 1. oscillator frequency
- Overview
- Comments
Bottle speed | ca. 2.5 m/s (65000 btls./h) |
Output type | 4-wire |
CSA approval | cCSAus Listed, General Purpose |
Sensing face | POM |
Measuring body | high grade steel tube |
Connection type | screw terminals |
Reduction factor rCu | 0.3 |
Time delay before availability | ≤ 20 ms |
Core cross-section | up to 2.5 mm2 |
Housing material | POM |
UL approval | cULus Listed, General Purpose |
Hysteresis | typ. 3 % |
Rated operating distance | 60 mm |
Switching function | complementary |
Assured operating distance | 0 ... 50 mm |
Voltage drop | ≤ 3 V |
Degree of protection | IP68 |
Output polarity | DC |
Reverse polarity protection | reverse polarity protected |
Switching state indicator | LED, yellow |
Reduction factor rAl | 0.4 |
Switching frequency | 0 ... 100 Hz |
Installation | non-flush |
Operating current | 0 ... 200 mA |
No-load supply current | ≤ 20 mA |
Adjustment aid | LED, green/red |
Short-circuit protection | pulsing |
Information for connection | A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 % |
Ambient temperature | 0 ... 60 В°C (32 ... 140 В°F) |
Operating voltage indicator | LED, green |
Output type | PNP |
Operating voltage | 10 ... 30 V |
Reduction factor r304 | 0.85 |
People also buy
Comments
No comments yet