Pepperl+Fuchs NJ8-18GK-N-5M Inductive sensor
Item Number: NJ8-18GK-N-5M
- Comfort series
- 8 mm non-flush
- Overview
- Datasheet
- Alternative numbers
- Comments
| Switching frequency | 0 ... 200 Hz |
| Rated operating distance | 8 mm |
| Installation | non-flush |
| Reduction factor rAl | 0.4 |
| Effective internal inductance | max. 50 andmicro;H ; a cable length of 10 m is considered. |
| Nominal voltage | 8 V |
| ATEX marking | |
| CSA approval | cCSAus Listed, General Purpose |
| Core cross-section | 0.75 mm2 |
| Effective internal inductance | max. 50 andmicro;H ; a cable length of 10 m is considered. |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| Output type | 2-wire |
| Switching function | Normally closed (NC) |
| EAC conformity | TR CU 012/2011 |
| Effective internal capacitance | max. 70 nF ; a cable length of 10 m is considered. |
| Ambient temperature | -25 ... 100 В°C (-13 ... 212 В°F) |
| Reduction factor rCu | 0.3 |
| UL approval | cULus Listed, General Purpose |
| Effective internal capacitance | max. 70 nF ; a cable length of 10 m is considered. |
| Connection type | cable PVC , 5 m |
| Appropriate type | NJ 8-18GK-N... |
| Output type | NAMUR |
| CE marking | [*PD-Z02585A*] |
| Degree of protection | IP68 |
| Use in the hazardous area | see instruction manuals |
| Appropriate type | NJ 8-18GK-N... |
| Maximum permissible ambient temperature | Details of the correlation between the type of circuit connected, the maximum permissible ambient temperature, the temperature class, and the effective internal reactance values can be found on the EC-type examination certificate. |
| Standards | EN 60079-0:2012+A11:2013 EN 60079-11:2012 Ignition protection ""Intrinsic safety"" Use is restricted to the following stated conditions |
| Assured operating distance | 0 ... 6.48 mm |
| Standards | EN 60079-0:2012+A11:2013 EN 60079-11:2012 Ignition protection ""Intrinsic safety"" Use is restricted to the following stated conditions |
| ATEX marking | |
| Reduction factor r304 | 0.85 |
| Housing material | PBT/PPS |
| Hysteresis | 1 ... 7 typ. 4 % |
| Sensing face | PBT |
| CE marking | [*PD-Z02585A*] |
| Maximum permissible ambient temperature | Details of the correlation between the type of circuit connected, the maximum permissible ambient temperature, the surface temperature, and the effective internal reactance values can be found on the EC-type-examination certificate. The maximum permissible ambient temperature of the data sheet must be noted, in addition, the lower of the two values must be maintained. |
Comments
No comments yet