Pepperl+Fuchs NJ8-18GM-N-5M Inductive sensor

Pepperl+Fuchs NJ8-18GM-N-5M
Item Number: NJ8-18GM-N-5M
  • 8 mm non-flush
  • Usable up to SIL 2 acc. to IEC 61508
163.80
Quantity
-
+
Total price: 163.80
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments
Nominal voltage8 V
CE marking[*PD-Z02585A*]
Reduction factor rCu 0.3
Effective internal capacitancemax. 70 nF ; a cable length of 10 m is considered.
Effective internal capacitancemax. 70 nF ; a cable length of 10 m is considered.
Effective internal inductancemax. 50 andmicro;H ; a cable length of 10 m is considered.
Output type2-wire
Appropriate typeNJ 8-18GM-N...
Sensing facePBT
Rated operating distance8 mm
Use in the hazardous areasee instruction manuals
Housing materialStainless steel 1.4305 / AISI 303
Assured operating distance0 ... 6.48 mm
Maximum permissible ambient temperature
Details of the correlation between the type of circuit connected, the maximum permissible ambient temperature, the surface temperature, and the effective internal reactance values can be found on the EC-type-examination certificate. The maximum permissible ambient temperature of the data sheet must be noted, in addition, the lower of the two values must be maintained.
StandardsEN 60079-0:2012+A11:2013 EN 60079-11:2012 Ignition protection ""Intrinsic safety""
Use is restricted to the following stated conditions
Hysteresistyp. %
StandardsEN 60079-0:2012+A11:2013 EN 60079-11:2012 Ignition protection ""Intrinsic safety""
Use is restricted to the following stated conditions
ATEX marking II 1G Ex ia IIC T6andhellip;T1 Ga The Ex-related marking can also be printed on the enclosed label.
Installationnon-flush
ATEX marking II 1D Ex ia IIIC T135В°C Da The Ex-related marking can also be printed on the enclosed label.
Reduction factor r304 0.85
Appropriate typeNJ 8-18GM-N...
Effective internal capacitancemax. 70 nF ; a cable length of 10 m is considered.
CCC approvalCCC approval / marking not required for products rated 36 V
Ambient temperature-25 ... 100 В°C (-13 ... 212 В°F)
Effective internal inductancemax. 50 andmicro;H ; a cable length of 10 m is considered.
UL approvalcULus Listed, General Purpose
CE marking[*PD-Z02585A*]
Maximum permissible ambient temperatureDetails of the correlation between the type of circuit connected, the maximum permissible ambient temperature, the temperature class, and the effective internal reactance values can be found on the EC-type examination certificate.
EAC conformityTR CU 012/2011
Appropriate typeNJ 8-18GM-N...
Reduction factor rAl 0.4
Connection typecable PVC , 5 m
Switching frequency0 ... 200 Hz
Core cross-section0.75 mm2
Effective internal inductancemax. 50 andmicro;H ; a cable length of 10 m is considered.
Output typeNAMUR
Degree of protectionIP67
CE marking[*PD-Z02585A*]
StandardsEN 60079-0:2012+A11:2013 EN 60079-11:2012 Ignition protection ""Intrinsic safety""
Use is restricted to the following stated conditions
Ambient temperatureDetails of the correlation between the type of circuit connected, the maximum permissible ambient temperature, the temperature class, and the effective internal reactance values can be found on the EC-type examination certificate. Note: Use the temperature table for category 1 !!! The 20 % reduction in accordance with EN 1127-1 has already been applied to the temperature table for category 1.
ATEX marking II 1G Ex ia IIC T6andhellip;T1 Ga The Ex-related marking can also be printed on the enclosed label.
Switching functionNormally closed (NC)
CSA approvalcCSAus Listed, General Purpose

Comments

No comments yet

Write a comment