Pepperl+Fuchs NJ8-18GM50-E2 Inductive sensor

Pepperl+Fuchs NJ8-18GM50-E2
Item Number: NJ8-18GM50-E2

Series: Cylindrical type, Housing diameter: 18 mm, Housing material: Stainless steel 1.4305 / AISI 303, Rated operating distance: 8 mm, Connection type: cable PVC , 2 m, Output type: 3-wire, Installation: non-flush, Type of voltage: DC

136.50
Quantity
-
+
Total price: 136.50
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments
General specifications
Switching element functionPNP NO
Rated operating distance8 mm
Installationnon-flush
Output polarityDC
Assured operating distance0 ... 6.48 mm
Reduction factor rAl0.42
Reduction factor rCu0.4
Reduction factor r3040.72
Nominal ratings
Operating voltage10 ... 60 V
Switching frequency0 ... 1000 Hz
Hysteresis1 ... 15 typ. 7.5 %
Reverse polarity protectionreverse polarity protected
Short-circuit protectionpulsing
Voltage dropless than or equal to 3 V
Operating current0 ... 200 mA
Lowest operating current0 mA
Off-state current0 ... 0.5 mA typ. 0.01 mA
No-load supply currentless than or equal to 9 mA
Switching state indicatorLED, yellow
Functional safety related parameters
MTTFd1010 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Approvals and certificates
UL approvalcULus Listed, General Purpose
CSA approvalcCSAus Listed, General Purpose
CCC approvalCertified by China Compulsory Certification (CCC)
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection typecable PVC , 2 m
Core cross-section0.5 mm2
Housing materialStainless steel 1.4305 / AISI 303
Sensing facePBT
Housing diameter18 mm
Degree of protectionIP67

Comments

No comments yet

Write a comment