Pepperl+Fuchs NMB1,5-8GM35-E2-FE-150MM-V3
Inductive sensor
- Stainless steel sensing face
- Sensing range 1.5 mm
- 3-wire DC
- Overview
- Comments
Output type | 3-wire |
Reduction factor rCu | 0 |
Reduction factor rAl | 0 |
CSA approval | cCSAus Listed, General Purpose |
CCC approval | CCC approval / marking not required for products rated 36 V |
Hysteresis | 5 ... 15 typ. 10 % |
Reduction factor r304 | 0.4 - 0.7 |
Reduction factor rSt37 | 1 |
Sensing face | Stainless steel 1.4305 / AISI 303 |
Housing material | Stainless steel 1.4305 / AISI 303 |
UL approval | cULus Listed, General Purpose |
Off-state current | 10 andmicro;A |
Housing diameter | 8 mm |
Operating voltage | 10 ... 30 V DC |
Operation indicator | LED red: output |
Reduction factor rBrass | 0 |
Ambient temperature | -25 ... 75 В°C (-13 ... 167 В°F) |
Short-circuit protection | yes |
Output type | PNP |
Connection type | Cable connector M8 x 1 , 3-pin with PUR cable 150 mm |
Rated operating distance | 1.5 mm |
Assured operating distance | 0 ... 1.215 mm |
Voltage drop | 2 V |
Installation | flush |
Degree of protection | IP67 |
Operating current | 100 mA |
Current consumption | 10 mA |
Standards | EN 60947-5-2:2007 IEC 60947-5-2:2007 |
Switching frequency | 80 Hz |
Switching function | Normally open (NO) |
Reverse polarity protection | yes |
Core cross-section | 0.14 mm2 |
Actuating element | Ferrous targets |
Output polarity | DC |
People also buy
Comments
No comments yet