Pepperl+Fuchs NMB10-18GM50-E2-F
Inductive sensor
Series: Cylindrical type, Housing diameter: 18 mm, Housing material: Stainless steel 1.4435 / AISI 316L, Rated operating distance: 10 mm, Connection type: cable TPE-S , 2 m 3 x 0.34 mm2, Output type: 3-wire, Installation: flush in mild steel, Type of voltage: DC
- Overview
- Comments
General specifications | ||
Switching element function | PNP | |
Rated operating distance | 10 mm | |
Installation | flush in mild steel | |
Output polarity | DC | |
Assured operating distance | 0 ... 8.1 mm | |
Reduction factor rAl | 0.4 | |
Reduction factor rCu | 0.25 | |
Reduction factor r304 | 0.5 (0.9 of material thickness 2 mm) | |
Reduction factor rSt37 | 1 | |
Nominal ratings | ||
Installation conditions | ||
A | 0 mm | |
B | 16 mm | |
C | 30 mm | |
F | 60 mm | |
Operating voltage | 10 ... 30 V | |
Switching frequency | 0 ... 300 Hz | |
Hysteresis | 3 ... 15 typ. 5 % | |
Reverse polarity protection | yes | |
Short-circuit protection | yes | |
Voltage drop | less than or equal to 2 V | |
Operating current | 0 ... 200 mA | |
Off-state current | less than or equal to 0.1 mA | |
No-load supply current | less than or equal to 10 mA | |
Switching state indicator | LED, yellow | |
Limit data | ||
Operating pressure statically | 60 bar (870.2 psi) max. | |
Approvals and certificates | ||
UL approval | cULus Listed, General Purpose | |
CSA approval | cCSAus Listed, General Purpose | |
CCC approval | CCC approval / marking not required for products rated less than or equal to 36 V | |
Ambient conditions | ||
Ambient temperature | -25 ... 85 °C (-13 ... 185 °F) | |
Mechanical specifications | ||
Connection type | cable TPE-S , 2 m 3 x 0.34 mm2 | |
Housing material | Stainless steel 1.4435 / AISI 316L | |
Sensing face | Stainless steel 1.4435 / AISI 316L | |
Housing diameter | 18 mm | |
Degree of protection | IP68 / IP69K | |
Mass | 112 g |
People also buy
Comments
No comments yet