Pepperl+Fuchs NMB10-18GM65-E2-V1 Inductive sensor

Pepperl+Fuchs NMB10-18GM65-E2-V1
Item Number: NMB10-18GM65-E2-V1

Series: Cylindrical type, Housing diameter: 18 mm, Housing material: Stainless steel 1.4305 / AISI 303, Rated operating distance: 10 mm, Connection type: Connector M12 x 1 , 4-pin, Output type: 3-wire, Installation: flush (Requirements: see drawing below), Type of voltage: DC

132.30
Quantity
-
+
Total price: 132.30
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments
General specifications
Switching element functionPNP NO
Rated operating distance10 mm
Installationflush (Requirements: see drawing below)
Output polarityDC
Assured operating distance0 ... 8.1 mm
Actuating elementFerrous and nonferrous targets
Reduction factor rAl0.4
Reduction factor rCu0.25
Reduction factor r3040.85
Reduction factor rSt371
Nominal ratings
Operating voltage10 ... 30 V DC
Switching frequency0 ... 240 Hz
Hysteresis3 ... 15 typ. 5 %
Reverse polarity protectionreverse polarity protected
Short-circuit protectionpulsing
Voltage dropless than or equal to 2 V
Operating currentless than or equal to 200 mA
Off-state currentless than or equal to 10 µA
No-load supply currentless than or equal to 10 mA
Operating voltage indicatorLED, green
Switching state indicatorLED, yellow
Standard conformity
StandardsEN 60947-5-2:2007
IEC 60947-5-2:2007
Approvals and certificates
UL approvalcULus Listed, General Purpose
CSA approvalcCSAus Listed, General Purpose
CCC approvalCCC approval / marking not required for products rated ‰¤36 V
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Connection typeConnector M12 x 1 , 4-pin
Housing materialStainless steel 1.4305 / AISI 303
Sensing faceStainless steel 1.4305 / AISI 303
Housing diameter18 mm
Degree of protectionIP67 / IP68 / IP69K - cordset dependent according to cable specification

Comments

No comments yet

Write a comment