Pepperl+Fuchs NMB10-18GM65-Z9-V1
Inductive sensor
We ship to United States of America!
- 10 mm flush
- Stainless steel sensing face
- Increased operating distance
Item Number:
NMB10-18GM65-Z9-V1
Delivery standard: 3-6 weeks, depending on the country.
Condition: new
Contact our experts
- Overview +
- Comments +
| Actuating element | Ferrous and nonferrous targets |
| Reverse polarity protection | reverse polarity protected |
| Sensing face | Stainless steel 1.4305 / AISI 303 |
| Output type | Two-wire |
| Degree of protection | IP67 |
| Rated operating distance | 10 mm |
| Output polarity | DC |
| Output type | 2-wire |
| Connection type | Connector plug M12 x 1 , 4-pin |
| Assured operating distance | 0 ... 8.1 mm |
| Reduction factor rAl | 0.4 |
| Reduction factor r304 | 0.85 |
| Standards | EN 60947-5-2:2007 IEC 60947-5-2:2007 |
| Installation | flush (Requirements: see drawing below) |
| Reduction factor rCu | 0.25 |
| Switching function | Normally open (NO) |
| Switching frequency | 200 Hz |
| Short-circuit protection | pulsing |
| Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| Operating voltage | 6 ... 30 V DC |
| Off-state current | 400 andmicro;A |
| Housing material | Stainless steel 1.4305 / AISI 303 |
| CSA approval | cCSAus Listed, General Purpose |
| Voltage drop | < 3 V |
| Operating current | 2 ... 200 mA |
| Reduction factor rSt37 | 1 |
| Switching state indicator | LED, yellow |
| Hysteresis | 5 ... 15 typ. 10 % |
| UL approval | cULus Listed, General Purpose |
Buy Pepperl+Fuchs NMB10-18GM65-Z9-V1 with the best possible price and delivery terms on eltra-trade.com
eltra-trade.com is an online electronic supply store. We offer only original products with all manufacturer's warranty. All your orders and products can be shipped in one delivery. Good price and good delivery times are our main goals. We always make open communication with our customers. Make an order and we will give you the best possible proposal.
Comments
No comments yet