Pepperl+Fuchs NMB15-30GM65-Z9-V1 Inductive sensor
Item Number: NMB15-30GM65-Z9-V1
- 15 mm flush
- Stainless steel sensing face
- Increased operating distance
- Overview
- Datasheet
- Alternative numbers
- Comments
| Output type | Two-wire |
| Ambient temperature | 0 ... 70 В°C (32 ... 158 В°F) |
| Switching function | Normally open (NO) |
| UL approval | cULus Listed, General Purpose |
| Output polarity | DC |
| Reduction factor rSt37 | 1 |
| Sensing face | Stainless steel 1.4305 / AISI 303 |
| Reduction factor r304 | 0.85 |
| Connection type | M12 connector, 4-pin |
| Reduction factor rCu | 0.2 |
| Voltage drop | < 3 V DC |
| Reduction factor rAl | 0.4 |
| Mission Time (TM) | 20 a |
| Hysteresis | 5 ... 15 typ. 10 % |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| CSA approval | cCSAus Listed, General Purpose |
| Short-circuit protection | yes |
| Operating voltage | 6 ... 30 V |
| Operation indicator | 4-way LED |
| Diagnostic Coverage (DC) | 0 % |
| Degree of protection | IP67 |
| Actuating element | Ferrous and nonferrous targets |
| Off-state current | < 400 andmicro;A |
| MTTFd | 970 a |
| Installation | flush (Requirements: see drawing below) |
| Reverse polarity protection | yes |
| Assured operating distance | 0 ... 12.15 mm |
| Switching frequency | 150 Hz |
| Housing material | Stainless steel 1.4305 / AISI 303 |
| Output type | 2-wire |
| Rated operating distance | 15 mm |
| Operating current | 2 ... 100 mA |
Comments
No comments yet