Pepperl+Fuchs NMB6-F104M-E3-FE-200MM-V3
Inductive sensor
- Sensing range 6 mm
- Ferrous targets
- Stainless steel sensing face
- 200 mm M8 male cordset with PUR jacket
- Power and output LEDs
- Overview
- Comments
| Output type | 3-wire |
| Reduction factor rCu | 0 |
| Reduction factor rAl | 0 |
| Core cross-section | 0.34 mm2 |
| Switching function | Normally closed (NC) |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Degree of protection | IP67 |
| Off-state current | ≤ 10 µA |
| Connection type | Cable connector M8 x 1 , 3-pin with PUR cable 200 mm |
| Voltage drop | ≤ 2 V |
| Installation | flush |
| Standards | EN 60947-5-2:2007 IEC 60947-5-2:2007 |
| Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
| Operating current | ≤ 100 mA |
| Operation indicator | Dual LED |
| UL approval | cULus Listed, General Purpose |
| Short-circuit protection | yes |
| Operating voltage | 10 ... 30 V DC |
| Actuating element | Ferrous targets |
| Reduction factor r304 | 0.6 ... 0.8 |
| Switching frequency | 20 Hz |
| Output type | PNP |
| Housing material | Stainless steel 1.4305 / AISI 303 |
| Assured operating distance | 0 ... 4.86 mm |
| Current consumption | ≤ 15 mA |
| Reverse polarity protection | reverse polarity protected |
| Hysteresis | 5 ... 15 typ. 10 % |
| Rated operating distance | 6 mm |
| Reduction factor rSt37 | 1 |
Comments
No comments yet