Pepperl+Fuchs NMN20-18GH50-E2-V1
Inductive sensor
- 20 mm non-flush
- Active surface metal
- One-piece housing with stainless steel (V4A- 1.4435)
- Overview
- Comments
Assured operating distance | 0 ... 16.2 mm |
Voltage drop | 2 V |
Diagnostic Coverage (DC) | 0 % |
Operating current | 0 ... 200 mA |
Output polarity | DC |
Off-state current | 0.1 mA |
UL approval | cULus Listed, General Purpose |
Reduction factor rCu | 0.9 |
MTTFd | 655 a |
Mass | 24 g |
Connection type | Connector plug M12 x 1 , 4-pin |
Degree of protection | IP68 / IP69K |
Switching state indicator | LED, yellow |
Reduction factor rAl | 1 |
Sensing face | Stainless steel 1.4435 / AISI 316L |
Rated operating distance | 20 mm |
Short-circuit protection | yes |
Reduction factor rSt37 | 1 |
Operating voltage | 10 ... 30 V |
Switching function | Normally open (NO) |
Mission Time (TM) | 20 a |
Installation | non-flush |
CCC approval | CCC approval / marking not required for products rated 36 V |
No-load supply current | 10 mA |
Ambient temperature | -25 ... 85 В°C (-13 ... 185 В°F) |
Output type | 3-wire |
Reduction factor r304 | 0.3 (0.6 of material thickness 2 mm) |
Housing material | Stainless steel 1.4435 / AISI 316L |
Output type | PNP |
Hysteresis | 3 ... 15 typ. 5 % |
Operating pressure statically | 60 bar (870.2 psi) max. |
Switching frequency | 0 ... 200 Hz |
Reverse polarity protection | yes |
People also buy
Comments
No comments yet