Pepperl+Fuchs NRB4-12GS40-E2-IO-V1
Inductive sensor
We ship to United States of America!
- 4 mm flush
- Reduction factor = 1
- Magnetic field resistant
- IO-link interface for service and process data
- Switch point mode or window mode can be set
- Switching function, stability alarm and pulse extension can be set
Item Number:
NRB4-12GS40-E2-IO-V1
Delivery standard: 3-6 weeks, depending on the country.
Condition: new
Contact our experts
- Overview +
- Comments +
| Hysteresis | typ. 3 % |
| Short-circuit protection | pulsing |
| Protection class | II |
| Default setting | operating mode = switch point mode with stability alarm switching function = Normally open (NO) switching distance = 4 mm |
| Interface type | IO-Link ( via C/Q = pin 4 ) |
| Compatible master port type | A |
| Reverse polarity protection | reverse polarity protected |
| Installation | flush |
| Output type | 3-wire |
| Min. cycle time | 2.3 ms |
| Status indicator | Multihole-LED, yellow |
| Process data witdh | Process data input (control system side): 2 Bit Process data output (control system side): none |
| Voltage drop | 0.5 V |
| Output polarity | DC |
| Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
| Reduction factor rCu | 1 |
| Connection type | Connector plug M12 x 1 , 4-pin |
| Device ID | 0x201101 (2101505) |
| Output type | PNP |
| Switching frequency | 0 ... 2000 Hz (switch point mode) 0 ... 125 Hz (window mode, switch point mode with stability alarm) |
| Operating current | 0 ... 200 mA |
| Reduction factor r304 | 1 |
| Mission Time (TM) | 20 a |
| MTTFd | 362 a |
| Transfer rate | COM 2 (38.4 kBaud) |
| Reduction factor rAl | 1 |
| Operating voltage | 10 ... 30 V DC |
| UL approval | cULus Listed, General Purpose Class 2 power source |
| Rated operating distance | 4 mm (factory setting) |
| Housing material | Stainless steel 1.4305 / AISI 303 |
| Alternating magnetic field | 200 mT |
| No-load supply current | 15 mA |
| Near operating distance | 3 mm (can be activated by software) |
| Mass | 25 g |
| Degree of protection | IP67 |
| Diagnostic Coverage (DC) | 0 % |
| Constant magnetic field | 200 mT |
| Switching function | Normally open/closed (NO/NC) programmable |
| Sensing face | PBT |
| Off-state current | 0 ... 0.5 mA typ. 60 andmicro;A at 25 В°C |
| Assured operating distance | 0 ... 3.24 mm |
| Reduction factor rSt37 | 1 |
| Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
| SIO mode support | yes |
| IO-Link Revision | 1.1 |
| Time delay before availability | max. 150 ms |
| Scope of delivery | 2 self locking nuts in scope of delivery |
| CCC approval | CCC approval / marking not required for products rated 36 V |
Buy Pepperl+Fuchs NRB4-12GS40-E2-IO-V1 with the best possible price and delivery terms on eltra-trade.com
eltra-trade.com is an electrical equipment shop. We have the status of the official representative of many European brands. We deliver to any country in the world. Our company is not an official distributor of all brands, but we can offer you competitive prices for all items in our catalog. We provide accurate delivery time information at the very beginning. We are the partner who can trust.
Comments
No comments yet