Pepperl+Fuchs NRB8-18GH40-E2-V1
Inductive sensor
- Reduction factor = 1
- Magnetic field resistant
- Stainless steel housing
- Front face FDA conform
- Overview
- Comments
| Off-state current | 0 ... 0.5 mA typ. 0.1 andmicro;A at 25 В°C |
| Assured operating distance | 0 ... 6.48 mm |
| Mass | 36 g |
| Scope of delivery | Supplied with 2 nuts |
| Rated insulation voltage | 60 V |
| Output type | PNP |
| Operating voltage | 10 ... 30 V DC |
| UL approval | cULus Listed, General Purpose Class 2 power source |
| Alternating magnetic field | 200 mT |
| Diagnostic Coverage (DC) | 0 % |
| Installation | flush |
| Mission Time (TM) | 20 a |
| Protection class | II |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| Housing material | stainless steel 1.4404 / AISI 316L |
| Output type | 3-wire |
| Ambient temperature | -25 ... 85 В°C (-13 ... 185 В°F) |
| MTTFd | 1393 a |
| Switching state indicator | Multihole-LED, yellow |
| Reduction factor rAl | 1 |
| Sensing face | LCP, (conforms with FDA) |
| Connection type | Connector plug M12 x 1 , 4-pin |
| Degree of protection | IP68 / IP69K |
| Switching function | Normally open (NO) |
| Reduction factor rCu | 1 |
| Voltage drop | 2 V |
| Switching frequency | 0 ... 1200 Hz |
| Hysteresis | typ. 5 % |
| Reduction factor rSt37 | 1 |
| Operating current | 0 ... 200 mA |
| Short-circuit protection | pulsing |
| Rated operating distance | 8 mm |
| Reduction factor r304 | 1 |
| No-load supply current | 14 mA |
| Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
| Output polarity | DC |
| Time delay before availability | max. 15 ms |
| Constant magnetic field | 200 mT |
| Reverse polarity protection | reverse polarity protected |
Comments
No comments yet