Pepperl+Fuchs NRN10-12GH40-E2-V1
Inductive sensor
- Reduction factor = 1
- Magnetic field resistant
- Stainless steel housing
- Front face FDA conform
Item Number:
NRN10-12GH40-E2-V1
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
Reduction factor r304 | 1 |
Operating voltage | 10 ... 30 V DC |
Reduction factor rCu | 1 |
Protection class | II |
Switching function | Normally open (NO) |
Sensing face | LCP, (conforms with FDA) |
Assured operating distance | 0 ... 8.1 mm |
Degree of protection | IP68 / IP69K |
CCC approval | CCC approval / marking not required for products rated 36 V |
Switching frequency | 0 ... 1500 Hz |
Rated insulation voltage | 60 V |
Diagnostic Coverage (DC) | 0 % |
Installation | non-flush |
Mission Time (TM) | 20 a |
Reverse polarity protection | reverse polarity protected |
Short-circuit protection | pulsing |
Mass | 15 g |
Constant magnetic field | 200 mT |
Off-state current | 0 ... 0.5 mA typ. 0.1 andmicro;A at 25 В°C |
Output polarity | DC |
Output type | 3-wire |
MTTFd | 1393 a |
Voltage drop | 2 V |
Reduction factor rSt37 | 1 |
Alternating magnetic field | 200 mT |
Scope of delivery | Supplied with 2 nuts |
Time delay before availability | max. 15 ms |
Housing material | stainless steel 1.4404 / AISI 316L |
Output type | PNP |
Switching state indicator | Multihole-LED, yellow |
UL approval | cULus Listed, General Purpose Class 2 power source |
Ambient temperature | -25 ... 85 В°C (-13 ... 185 В°F) |
Operating current | 0 ... 200 mA |
No-load supply current | 14 mA |
Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
Reduction factor rAl | 1 |
Rated operating distance | 10 mm |
Hysteresis | typ. 5 % |
Connection type | Connector plug M12 x 1 , 4-pin |
People also buy
Comments
No comments yet