Pepperl+Fuchs NRN10-12GS40-E2-IO-V1
Inductive sensor

Pepperl+Fuchs NRN10-12GS40-E2-IO-V1
  • 10 mm non-flush
  • Reduction factor = 1
  • Magnetic field resistant
  • IO-link interface for service and process data
  • Switch point mode or window mode can be set
  • Switching function, stability alarm and pulse extension can be set
Item Number: NRN10-12GS40-E2-IO-V1
Price on Request
Total price: 0.00
Contact our experts
  • Overview
  • Comments
No-load supply current 15 mA
Reduction factor rSt37 1
Housing materialStainless steel 1.4305 / AISI 303
Degree of protectionIP67
Device ID0x201104 (2101508)
Constant magnetic field200 mT
Reverse polarity protectionreverse polarity protected
Connection typeConnector plug M12 x 1 , 4-pin
Voltage drop 0.5 V
Output typePNP
Diagnostic Coverage (DC)0 %
Mass24 g
Switching functionNormally open/closed (NO/NC) programmable
Assured operating distance0 ... 8.1 mm
SIO mode supportyes
Default settingoperating mode = switch point mode with stability alarm
switching function = Normally open (NO)
switching distance = 10 mm
Switching frequency0 ... 1300 Hz (switch point mode)
0 ... 80 Hz (window mode, switch point mode with stability alarm)
Reduction factor rCu 1
Interface typeIO-Link ( via C/Q = pin 4 )
Near operating distance8 mm (can be activated by software)
Off-state current0 ... 0.5 mA typ. 60 andmicro;A at 25 В°C
Output type3-wire
Mission Time (TM)20 a
UL approvalcULus Listed, General Purpose
Class 2 power source
Hysteresistyp. 3 %
MTTFd362 a
Scope of delivery2 self locking nuts in scope of delivery
Reduction factor r304 1
Min. cycle time2.3 ms
Ambient temperature-25 ... 70 В°C (-13 ... 158 В°F)
Sensing facePBT
Protection classII
Output polarityDC
Storage temperature-40 ... 85 В°C (-40 ... 185 В°F)
Reduction factor rAl 1
Rated operating distance10 mm (factory setting)
Compatible master port typeA
Transfer rateCOM 2 (38.4 kBaud)
Operating voltage10 ... 30 V DC
Short-circuit protectionpulsing
Alternating magnetic field200 mT
IO-Link Revision1.1
Process data witdhProcess data input (control system side): 2 Bit
Process data output (control system side): none
CCC approvalCCC approval / marking not required for products rated 36 V
Status indicatorMultihole-LED, yellow
Time delay before availabilitymax. 150 ms
Operating current0 ... 200 mA


No comments yet

Write a comment