Pepperl+Fuchs NRN40-L3K-E2-IO-C-V1
Inductive sensor
- 40 mm non-flush
- Reduction factor = 1
- Magnetic field resistant
- Weld Immune
- IO-link interface for service and process data
- Switch point mode or window mode can be set
- Switching function, stability alarm and pulse extension can be set
- 4-way LED indicator
- Quick mounting bracket
Item Number:
NRN40-L3K-E2-IO-C-V1
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
Status indicator | LED, yellow |
IO-Link Revision | 1.1 |
Near operating distance | 35 mm (can be activated by software) |
Default setting | operating mode = switch point mode with stability alarm switching function = Normally open (NO) switching distance = 40 mm |
Interface type | IO-Link ( via C/Q = pin 4 ) |
Operating voltage | 10 ... 30 V DC |
Output polarity | DC |
Time delay before availability | max. 150 ms |
Operating voltage indicator | LED, green |
Alternating magnetic field | 200 mT |
Output type | 3-wire |
Reduction factor rSt37 | 1 |
Off-state current | 0 ... 0.5 mA typ. 60 andmicro;A at 25 В°C |
Min. cycle time | 2.3 ms |
Compatible master port type | A |
Switching function | Normally open/closed (NO/NC) programmable |
Reduction factor r304 | 1 |
Rated operating distance | 40 mm (factory setting) |
Sensing face | PA 6 Grivory GVN-35H |
Protection class | II |
Constant magnetic field | 200 mT |
No-load supply current | 20 mA |
CCC approval | CCC approval / marking not required for products rated 36 V |
Mass | 190 g |
Assured operating distance | 0 ... 32.4 mm |
Installation | non-flush |
Diagnostic Coverage (DC) | 0 % |
Degree of protection | IP67 |
UL approval | cULus Listed, General Purpose Class 2 power source |
Reverse polarity protection | reverse polarity protected |
Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
Housing material | GD-ZnAl4Cu1, coated mounting flange PA6-GF35 |
MTTFd | 701 a |
SIO mode support | yes |
Hysteresis | typ. 3 % |
Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
Operating current | 0 ... 200 mA |
Connection type | Connector plug M12 x 1 , 4-pin |
Switching frequency | 0 ... 180 Hz (switch point mode) 0 ... 30 Hz (window mode, switch point mode with stability alarm) |
Process data witdh | Process data input (control system side): 2 Bit Process data output (control system side): none |
Device ID | 0x201004 (2101252) |
Reduction factor rCu | 1 |
Output type | PNP |
Mission Time (TM) | 20 a |
Voltage drop | 0.5 V |
Short-circuit protection | pulsing |
Transfer rate | COM 2 (38.4 kBaud) |
Reduction factor rAl | 1 |
People also buy
Comments
No comments yet