Pepperl+Fuchs NSB5-18GM45-2E2-V1-S2D2
Inductive sensor

Pepperl+Fuchs NSB5-18GM45-2E2-V1-S2D2
  • No unusable area
  • 5 mm flush
  • Use of standard metallic actuating surfaces
  • Applications up to Cat. 2, PLd/SIL 2 possible (can be used redundantly up to Cat. 3, PLe/SIL 3)
  • LED for switching state and fault indication
  • Safety outputs OSSD
  • TГњV certified
Item Number: NSB5-18GM45-2E2-V1-S2D2
134.34
-
+
Total price: 134.34
The price is not final. Please check with the manager!
Contact our experts
  • Overview
  • Comments
UL approvalcULus Listed, General Purpose, Class 2 Power Source
Performance level (PL)PL d
Assured release distance of a PDDB7.5 mm
No-load supply current≤ 15 mA
Mass45 g
Reduction factor rBrass 0.55
Diagnostic Coverage (DC)min. 60 %
Output type4-wire
Switching frequency0 ... 30 Hz
MTTFd> 7500 a
CategoryCat. 2
Off-state current0 ... 0.5 mA
Degree of protectionIP68 / IP69
Overload resistanceyes
Time delay before availability≤ 300 ms
CCC approvalCCC approval / marking not required for products rated ≤36 V
Switching function2 x normally open (NO)
Reverse polarity protectionreverse polarity protected
Reduction factor r304 0.85
Ambient temperature-25 ... 70 В°C (-13 ... 158 В°F)
Mission Time (TM)20 a
Rated operating voltage24 V
Housing materialbrass, nickel-plated
Actuating elementReference target according EN IEC 60947-5-2 (FE360 - ST37K)
18 mm x 18 mm x 1 mm
Connection typeConnector plug M12 x 1 , 4-pin
Scope of delivery2 self locking nuts in scope of delivery
Error indicatorLED, red
Reduction factor rAl 0.5
Storage temperature-40 ... 85 В°C (-40 ... 185 В°F)
Safety Integrity Level (SIL)SIL 2
Operating current1 ... 30 mA per output
Output polarityDC
Reduction factor rCu 0.4
Hysteresistyp. 5%
Switching state indicatorLED, yellow
Altitude≤ 2000 m above MSL
Output typePNP
Rated insulation voltage30 V
Operating voltage18 ... 30 V
Assured operating distance0 ... 4.05 mm
Voltage drop≤ 3 V
Installationflush
Short-circuit protectionpulsing
Sensing facePBT
Rated operating distance5 mm

Comments

No comments yet

Write a comment