Pepperl+Fuchs NSN4-12GH45-2E2-V1-M1-S2D2 Inductive sensor

Pepperl+Fuchs NSN4-12GH45-2E2-V1-M1-S2D2
Item Number: NSN4-12GH45-2E2-V1-M1-S2D2
  • No unusable area
  • 4 mm non-flush
  • Use of standard metallic actuating surfaces
  • Applications up to Cat. 2, PLd/SIL 2 possible (can be used redundantly up to Cat. 3, PLe/SIL 3)
  • LED for switching state and fault indication
  • Safety outputs OSSD
  • TГњV certified
  • E1-Type approval
  • Extended temperature range
    -40 ... +85 В°C
133.70
Quantity
-
+
Total price: 133.70
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments
Switching state indicatorLED, yellow
Rated operating voltage24 V
Hysteresistyp. 5%
Safety Integrity Level (SIL)SIL 2
Reduction factor rCu 0.5
Connection typeConnector plug M12 x 1 , 4-pin
Mission Time (TM)20 a
Assured operating distance0 ... 3.24 mm
Output typePNP
Altitude≤ 2000 m above MSL
Output type4-wire
Sensing facePBT
Time delay before availability≤ 300 ms
No-load supply current≤ 15 mA
CCC approvalCCC approval / marking not required for products rated ≤36 V
Housing materialstainless steel 1.4404 / AISI 316L
Reduction factor r304 0.9
Storage temperature-40 ... 85 В°C (-40 ... 185 В°F)
Actuating elementReference target according EN IEC 60947-5-2 (FE360 - ST37K)
12 mm x 12 mm x 1 mm
Switching function2 x normally open (NO)
Rated operating distance4 mm
Off-state current0 ... 0.5 mA
Operating voltage18 ... 30 V
Short-circuit protectionpulsing
Ambient temperature-40 ... 85 В°C (-40 ... 185 В°F)
Reduction factor rBrass 0.6
Degree of protectionIP68 / IP69
Mass18 g
Operating current1 ... 30 mA per output
Assured release distance of a PDDB6 mm
Temperature drift≤ 10 %
below - 25В°C ≤ 20%
Voltage drop≤ 3 V
Rated insulation voltage30 V
Reverse polarity protectionreverse polarity protected
UL approvalcULus Listed, General Purpose, Class 2 Power Source
Performance level (PL)PL d
Scope of deliverySupplied with 2 nuts
MTTFd> 7500 a
CategoryCat. 2
Reduction factor rAl 0.55
Error indicatorLED, red
Output polarityDC
E1 Type approval10R-04
Installationnon-flush
Switching frequency0 ... 30 Hz
Diagnostic Coverage (DC)min. 60 %
Overload resistanceyes

Comments

No comments yet

Write a comment