Pepperl+Fuchs OBD1000-R101-2EP-IO-0,3M-V31 Diffuse mode sensor

Pepperl+Fuchs OBD1000-R101-2EP-IO-0,3M-V31
Item Number: OBD1000-R101-2EP-IO-0,3M-V31
  • Miniature design with versatile mounting options
  • Extended temperature range
    -40В°C ... 60В°C
  • High degree of protection IP69K
  • IO-link interface for service and process data
Price on Request
Quantity
-
+
Total price: 0.00
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments
Control elementsSensing range adjuster
Protection classIII
Voltage drop 1.5 V DC
Angle of divergence3.7 В°
Compatible master port typeA
Operating voltage10 ... 30 V DC
Housing depth18.3 mm
Diameter of the light spotapprox. 65 mm at a distance of 1000 mm
Device ID0x110101 (1114369)
Housing height33.8 mm
Detection range min.20 ... 50 mm
Ambient temperature-40 ... 60 В°C (-40 ... 140 В°F) , fixed cable
-25 ... 60 В°C (-13 ... 140 В°F) , movable cable not appropriate for conveyor chains
Light sourceLED
Detection range2 ... 1000 mm
Light typemodulated visible red light
Ambient light limitEN 60947-5-2
Storage temperature-40 ... 70 В°C (-40 ... 158 В°F)
Response time0.5 ms
Operation indicatorLED green:
constantly on - power on
flashing (4Hz) - short circuit
flashing with short break (1 Hz) - IO-Link mode
No-load supply current< 25 mA at 24 V supply voltage
Usage categoryDC-12 and DC-13
Function indicatorLED yellow:
constantly on - object detected
constantly off - object not detected
LED risk group labellingexempt group
Reference targetstandard white, 100 mm x 100 mm
Switching frequency1000 Hz
Min. cycle time2.3 ms
UL approvalE87056 , cULus Listed , class 2 power supply , type rating 1
Control elementsLight-on/dark-on changeover switch
Connectionfixed cable 300 mm with M8 x 1 male connector; 4-pin
Communication interfaceIEC 61131-9
Switching voltagemax. 30 V DC
Cable length0.3 m
Massapprox. 10 g
Switching currentmax. 100 mA , resistive load
Product standardEN 60947-5-2
MTTFd724 a
SIO mode supportyes
Housing width13.9 mm
Switching typeThe switching type of the sensor is adjustable. The default setting is:
C/Q - Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link
/Q - Pin2: NPN normally closed / dark-on, PNP normally open / light-on
Transfer rateCOM 2 (38.4 kBaud)
Signal output2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Diagnostic Coverage (DC)0 %
Degree of protectionIP67 / IP69 / IP69K
Interface typeIO-Link ( via C/Q = pin 4 )
Adjustment range50 ... 1000 mm
Ripplemax. 10 %
Process data witdhProcess data input 1 Bit
Process data output 2 Bit
IO-Link Revision1.1
Mission Time (TM)20 a

Comments

No comments yet

Write a comment

in international format without spaces
All fields are required