Pepperl+Fuchs OBD800-R103-2EP-IO-V31
Diffuse mode sensor
- Miniature design with versatile mounting options
- Extended temperature range
-40В°C ... 60В°C - High degree of protection IP69K
- IO-link interface for service and process data
Item Number:
OBD800-R103-2EP-IO-V31
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
The switching type of the detector is adjustable. The default setting is:
C/Q - Pin 4: NPN normally open / on, PNP normally closed / off, IO-Link
/Q - Pin 2: NPN normally closed / off, PNP normally open / on
| UL approval | E87056 , cULus Listed , class 2 power supply , type rating 1 |
| Reference target | standard white, 100 mm x 100 mm |
| Storage temperature | -40 ... 70 В°C (-40 ... 158 В°F) |
| Ambient temperature | -40 ... 60 В°C (-40 ... 140 В°F) |
| Function indicator | LED yellow: constantly on - object detected constantly off - object not detected |
| MTTFd | 724 a |
| Detection range min. | 20 ... 40 mm |
| Switching frequency | 1000 Hz |
| Response time | 0.5 ms |
| Switching current | max. 100 mA , resistive load |
| Usage category | DC-12 and DC-13 |
| Voltage drop | 1.5 V DC |
| Mass | approx. 12 g |
| Detection range | 2 ... 800 mm |
| Housing depth | 26.7 mm |
| Product standard | EN 60947-5-2 |
| Process data witdh | Process data input 1 Bit Process data output 2 Bit |
| Diameter of the light spot | approx. 55 mm at a distance of 800 mm |
| IO-Link Revision | 1.1 |
| Switching voltage | max. 30 V DC |
| Ripple | max. 10 % |
| Device ID | 0x110103 (1114371) |
| Operation indicator | LED green: constantly on - power on flashing (4Hz) - short circuit flashing with short break (1 Hz) - IO-Link mode |
| Housing height | 43.9 mm |
| Communication interface | IEC 61131-9 |
| Connection | M8 x 1 connector, 4-pin |
| Angle of divergence | 3.7 В° |
| SIO mode support | yes |
| Degree of protection | IP67 / IP69 / IP69K |
| Switching type | The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link /Q - Pin2: NPN normally closed / dark-on, PNP normally open / light-on |
| Compatible master port type | A |
| Mission Time (TM) | 20 a |
| Control elements | sensitivity adjustment |
| Protection class | III |
| Light type | modulated visible red light |
| Diagnostic Coverage (DC) | 0 % |
| Min. cycle time | 2.3 ms |
| Housing width | 15 mm |
| LED risk group labelling | exempt group |
| Interface type | IO-Link ( via C = pin 4 ) |
| Transfer rate | COM 2 (38.4 kBaud) |
| Control elements | Light-on/dark-on changeover switch |
| Ambient light limit | EN 60947-5-2 |
| Signal output | 2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected |
| Adjustment range | 40 ... 800 mm |
| No-load supply current | < 25 mA at 24 V supply voltage |
| Light source | LED |
Comments
No comments yet