Pepperl+Fuchs OBE10M-R103-S2EP-IO-V31
Thru-beam sensor

Pepperl+Fuchs OBE10M-R103-S2EP-IO-V31
  • Miniature design with versatile mounting options
  • IO-link interface for service and process data
  • Various frequencies for avoiding mutual interference (cross-talk immunity)
  • Extended temperature range
    -40В°C ... 60В°C
  • High degree of protection IP69K
Item Number: OBE10M-R103-S2EP-IO-V31
Price on Request
-
+
Total price: 0.00
Contact our experts
  • Overview
  • Comments

The switching type of the detector is adjustable. The default setting is:
C/Q - Pin 4: NPN normally open / off, PNP normally closed / on, IO-Link
/Q - Pin 2: NPN normally closed / on, PNP normally open / off

Diameter of the light spotapprox. 65 mm at a distance of 1 m
Usage categoryDC-12 and DC-13
Operating voltage10 ... 30 V DC
Control elementsReceiver: light/dark switch
Light sourceLED
Signal output2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected
ReceiverOBE10M-R103-2EP-IO-V31
IO-Link Revision1.1
Interface typeIO-Link ( via C/Q = pin 4 )
ConnectionM8 x 1 connector, 4-pin
Degree of protectionIP67 / IP69 / IP69K
Compatible master port typeA
Threshold detection range12.5 m
Housing depth26.7 mm
Effective detection range0 ... 10 m
Light typemodulated visible red light
Function indicatorYellow LED:
Permanently lit - light path clear
Permanently off - object detected
Flashing (4 Hz) - insufficient operating reserve
Process data witdhEmitter:
Process data output: 2 Bit
Receiver:
Process data input: 2 Bit
Process data output: 2 Bit
Switching typeThe switching type of the sensor is adjustable. The default setting is:
C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link
/Q - Pin2: NPN normally closed / light-on, PNP normally open / dark-on
MTTFd462 a
LED risk group labellingexempt group
Housing height43.9 mm
EmitterOBE10M-R103-S-IO-V31
Housing width15 mm
Min. cycle time2.3 ms
Diagnostic Coverage (DC)0 %
Angle of divergence3.7 В°
Mission Time (TM)20 a

Comments

No comments yet

Write a comment