Pepperl+Fuchs OBE12M-R100-SEP-IO-0,3M-V3 Thru-beam sensor

Pepperl+Fuchs OBE12M-R100-SEP-IO-0,3M-V3
Item Number: OBE12M-R100-SEP-IO-0,3M-V3
  • Miniature design with versatile mounting options
  • IO-link interface for service and process data
  • Various frequencies for avoiding mutual interference (cross-talk immunity)
  • Extended temperature range
    -40В°C ... 60В°C
  • High degree of protection IP69K
Price on Request
Total price: 0.00
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments
No-load supply currentEmitter: 14 mA
Receiver: 13 mA at 24 V supply voltage
Control elementsReceiver: light/dark switch
LED risk group labellingexempt group
Cable length0.3 m
Storage temperature-40 ... 70 В°C (-40 ... 158 В°F)
UL approvalE87056 , cULus Listed , class 2 power supply , type rating 1
Response time0.5 ms
Switching currentmax. 100 mA , resistive load
Compatible master port typeA
Protection classIII
MassEmitter: approx. 10 g receiver: approx. 10 g
Threshold detection range15 m
IO-Link Revision1.1
Voltage drop 1.5 V DC
Housing width11 mm
Connection300 mm fixed cable with M8 x 1, 3-pin connector
Transfer rateCOM 2 (38.4 kBaud)
Control elementsReceiver: sensitivity adjustment
Min. cycle time2.3 ms
Ambient light limitEN 60947-5-2 : 30000 Lux
Function indicatorYellow LED:
Permanently lit - light path clear
Permanently off - object detected
Flashing (4 Hz) - insufficient operating reserve
Ripplemax. 10 %
Housing depth21.5 mm
Product standardEN 60947-5-2
Device IDEmitter: 0x110401 (1115137)
Receiver: 0x110301 (1114881)
Process data witdhEmitter:
Process data output: 2 Bit
Process data input: 2 Bit
Process data output: 2 Bit
Test inputemitter deactivation at +UB
Usage categoryDC-12 and DC-13
Effective detection range0 ... 12 m
Diagnostic Coverage (DC)0 %
Ambient temperature-40 ... 60 В°C (-40 ... 140 В°F) , fixed cable
-25 ... 60 В°C (-13 ... 140 В°F) , movable cable not appropriate for conveyor chains
Parameterization indicatorIO link communication: green LED goes out briefly (1 Hz)
Switching frequency1000 Hz
Operation indicatorLED green:
constantly on - power on
flashing (4Hz) - short circuit
flashing with short break (1 Hz) - IO-Link mode
Housing height37.1 mm
Switching voltagemax. 30 V DC
Signal output1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected, overvoltage protected
Angle of divergence3.7 В°
Light sourceLED
Mission Time (TM)20 a
Interface typeIO-Link ( via C/Q = pin 4 )
Light typemodulated visible red light
Communication interfaceIEC 61131-9
Diameter of the light spotapprox. 65 mm at a distance of 1 m
Operating voltage10 ... 30 V DC
MTTFd462 a
Degree of protectionIP67 / IP69 / IP69K
SIO mode supportyes
Switching typeThe switching type of the sensor is adjustable. The default setting is:
C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link


No comments yet

Write a comment

in international format without spaces
All fields are required