Pepperl+Fuchs OBE12M-R100-SEP-IO-V3 Thru-beam sensor

Pepperl+Fuchs OBE12M-R100-SEP-IO-V3
Item Number: OBE12M-R100-SEP-IO-V3
  • Miniature design with versatile mounting options
  • IO-link interface for service and process data
  • Various frequencies for avoiding mutual interference (cross-talk immunity)
  • Extended temperature range
    -40В°C ... 60В°C
  • High degree of protection IP69K
Price on Request
Total price: 0.00
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments
Light sourceLED
Switching typeThe switching type of the sensor is adjustable. The default setting is:
C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link
Ambient light limitEN 60947-5-2 : 30000 Lux
Parameterization indicatorIO link communication: green LED goes out briefly (1 Hz)
Degree of protectionIP67 / IP69 / IP69K
Housing width11 mm
UL approvalE87056 , cULus Listed , class 2 power supply , type rating 1
Control elementsReceiver: sensitivity adjustment
Operating voltage10 ... 30 V DC
Min. cycle time2.3 ms
Communication interfaceIEC 61131-9
Control elementsReceiver: light/dark switch
Light typemodulated visible red light
Product standardEN 60947-5-2
Housing depth21.5 mm
Angle of divergence3.7 В°
Switching frequency1000 Hz
Ambient temperature-40 ... 60 В°C (-40 ... 140 В°F)
ConnectionM8 x 1 connector, 3-pin
Response time0.5 ms
SIO mode supportyes
Usage categoryDC-12 and DC-13
LED risk group labellingexempt group
MassEmitter: approx. 10 g receiver: approx. 10 g
Operation indicatorLED green:
constantly on - power on
flashing (4Hz) - short circuit
flashing with short break (1 Hz) - IO-Link mode
Protection classIII
Ripplemax. 10 %
Signal output1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected, overvoltage protected
Compatible master port typeA
Process data witdhEmitter:
Process data output: 2 Bit
Process data input: 2 Bit
Process data output: 2 Bit
Diagnostic Coverage (DC)0 %
No-load supply currentEmitter: 14 mA
Receiver: 13 mA at 24 V supply voltage
Effective detection range0 ... 12 m
Diameter of the light spotapprox. 65 mm at a distance of 1 m
Interface typeIO-Link ( via C/Q = pin 4 )
Mission Time (TM)20 a
Storage temperature-40 ... 70 В°C (-40 ... 158 В°F)
Threshold detection range15 m
Test inputemitter deactivation at +UB
Switching voltagemax. 30 V DC
MTTFd462 a
Function indicatorYellow LED:
Permanently lit - light path clear
Permanently off - object detected
Flashing (4 Hz) - insufficient operating reserve
Voltage drop 1.5 V DC
Device IDEmitter: 0x110401 (1115137)
Receiver: 0x110301 (1114881)
Transfer rateCOM 2 (38.4 kBaud)
IO-Link Revision1.1
Switching currentmax. 100 mA , resistive load
Housing height37.1 mm


No comments yet

Write a comment

in international format without spaces
All fields are required