Pepperl+Fuchs OBE20M-R100-S2EP-IO-0,3M-V1-L
Laser thru-beam sensor
We ship
to United States of America
- Miniature design with versatile mounting options
- DuraBeam Laser Sensors - durable and employable like an LED
- IO-link interface for service and process data
- Various frequencies for avoiding mutual interference (cross-talk immunity)
- Extended temperature range
-40?°C ... 60?°C - High degree of protection IP69K
Item Number:
OBE20M-R100-S2EP-IO-0,3M-V1-L
Delivery standard: 3-6 weeks, depending on the country.
Condition: new
Contact our experts
- Overview +
- Comments +
| Ambient temperature | -40 ... 60 ?°C (-40 ... 140 ?°F) , fixed cable -25 ... 60 ?°C (-13 ... 140 ?°F) , movable cable not appropriate for conveyor chains |
| Switching voltage | max. 30 V DC |
| Diagnostic Coverage (DC) | 0 % |
| Switching current | max. 100 mA , resistive load |
| Protection class | III |
| Control elements | Receiver: sensitivity adjustment |
| UL approval | E87056 , cULus Listed , class 2 power supply , type rating 1 |
| Mass | Emitter: approx. 10 g receiver: approx. 10 g |
| Operating voltage | 10 ... 30 V DC |
| Signal output | 2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected |
| Ripple | max. 10 % |
| Emitter | OBE20M-R100-S-IO-0,3M-V1-L |
| Cable length | 0.3 m |
| Response time | 0.4 ms |
| IO-Link Revision | 1.1 |
| Voltage drop | 1.5 V DC |
| Usage category | DC-12 and DC-13 |
| Control elements | Receiver: light/dark switch |
| Angle of divergence | approx. 0.3 ?° |
| Light type | modulated visible red light |
| Receiver | OBE20M-R100-2EP-IO-0,3M-V1-L |
| Housing depth | 21.5 mm |
| Device ID | Emitter: 0x110402 (1115138) Reciever: 0x110302 (1114882) |
| Storage temperature | -40 ... 70 ?°C (-40 ... 158 ?°F) |
| Effective detection range | 0 ... 20 m |
| No-load supply current | Emitter: 13 mA Receiver: 13 mA at 24 V supply voltage |
| Operation indicator | LED green: constantly on - power on flashing (4Hz) - short circuit flashing with short break (1 Hz) - IO-Link mode |
| Product standard | EN 60947-5-2 |
| MTTFd | 440 a |
| Diameter of the light spot | approx. 50 mm at a distance of 20 m |
| Function indicator | Yellow LED: Permanently lit - light path clear Permanently off - object detected Flashing (4 Hz) - insufficient operating reserve |
| Housing width | 11 mm |
| Switching type | The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link /Q - Pin2: NPN normally closed / light-on, PNP normally open / dark-on |
| Interface type | IO-Link ( via C/Q = pin 4 ) |
| Test input | emitter deactivation at +UB |
| Threshold detection range | 30 m |
| Connection | 300 mm fixed cable with M12 x 1, 4-pin connector |
| Communication interface | IEC 61131-9 |
| Compatible master port type | A |
| Ambient light limit | EN 60947-5-2 : 30000 Lux |
| Min. cycle time | 2.3 ms |
| Parameterization indicator | IO link communication: green LED goes out briefly (1 Hz) |
| Transfer rate | COM 2 (38.4 kBaud) |
| Housing height | 37.1 mm |
| Process data witdh | Emitter: Process data output: 2 Bit Receiver: Process data input: 2 Bit Process data output: 2 Bit |
| Laser safety | EN 60825-1:2014 |
| Degree of protection | IP67 / IP69 / IP69K |
| SIO mode support | yes |
| Light source | laser diode |
| FDA approval | IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 |
| Mission Time (TM) | 20 a |
| Switching frequency | 1250 Hz |
Buy Pepperl+Fuchs OBE20M-R100-S2EP-IO-0,3M-V1-L with the best possible price and delivery terms on eltra-trade.com
eltra-trade.com offers industrial control components. A lot of in-stock parts, contact us to check availability. If you need to receive your order as soon as possible, we can provide express delivery. We always guarantee high-quality products. Our team of experts will find the best sales prices for you. We always fulfill our obligations.
Comments
No comments yet