Pepperl+Fuchs OBE20M-R100-S2EP-IO-V31-IR
Thru-beam sensor
- Miniature design with versatile mounting options
- IO-link interface for service and process data
- Various frequencies for avoiding mutual interference (cross-talk immunity)
- Extended temperature range
-40В°C ... 60В°C - High degree of protection IP69K
- Overview
- Comments
Light source | LED |
No-load supply current | Emitter: 14 mA Receiver: 13 mA at 24 V supply voltage |
SIO mode support | yes |
Housing depth | 21.5 mm |
Voltage drop | 1.5 V DC |
Parameterization indicator | IO link communication: green LED goes out briefly (1 Hz) |
Control elements | Receiver: light/dark switch |
Signal output | 2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected |
Operation indicator | LED green: constantly on - power on flashing (4Hz) - short circuit flashing with short break (1 Hz) - IO-Link mode |
Threshold detection range | 25 m |
Interface type | IO-Link ( via C/Q = pin 4 ) |
Ambient temperature | -40 ... 60 В°C (-40 ... 140 В°F) |
Product standard | EN 60947-5-2 |
Transfer rate | COM 2 (38.4 kBaud) |
Housing width | 11 mm |
Storage temperature | -40 ... 70 В°C (-40 ... 158 В°F) |
Usage category | DC-12 and DC-13 |
Process data witdh | Emitter: Process data output: 2 Bit Receiver: Process data input: 2 Bit Process data output: 2 Bit |
Emitter | OBE20M-R100-S-IO-V31-IR |
Diagnostic Coverage (DC) | 0 % |
Control elements | Receiver: sensitivity adjustment |
Switching voltage | max. 30 V DC |
Function indicator | Yellow LED: Permanently lit - light path clear Permanently off - object detected Flashing (4 Hz) - insufficient operating reserve |
LED risk group labelling | exempt group |
UL approval | E87056 , cULus Listed , class 2 power supply , type rating 1 |
Ripple | max. 10 % |
Receiver | OBE20M-R100-2EP-IO-V31-IR |
Mass | Emitter: approx. 10 g receiver: approx. 10 g |
Mission Time (TM) | 20 a |
Communication interface | IEC 61131-9 |
Ambient light limit | EN 60947-5-2 : 30000 Lux |
Compatible master port type | A |
Degree of protection | IP67 / IP69 / IP69K |
Housing height | 36 mm |
Test input | emitter deactivation at +UB |
Switching type | The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link /Q - Pin2: NPN normally closed / light-on, PNP normally open / dark-on |
IO-Link Revision | 1.1 |
Device ID | Emitter: 0x110401 (1115137) Receiver: 0x110301 (1114881) |
Connection | M8 x 1 connector, 4-pin |
Min. cycle time | 2.3 ms |
Switching frequency | 1000 Hz |
Diameter of the light spot | approx. 100 mm at a distance of 1 m |
Response time | 0.5 ms |
Angle of divergence | 5.4 В° |
Light type | modulated infrared light 850 nm |
MTTFd | 462 a |
Switching current | max. 100 mA , resistive load |
Protection class | III |
Effective detection range | 0.2 ... 20 m |
Operating voltage | 10 ... 30 V DC |
People also buy
Comments
No comments yet