Pepperl+Fuchs OBE20M-R101-S2EP-IO-V31-L
Laser thru-beam sensor
- Miniature design with versatile mounting options
- DuraBeam Laser Sensors - durable and employable like an LED
- IO-link interface for service and process data
- Various frequencies for avoiding mutual interference (cross-talk immunity)
- Extended temperature range
-40В°C ... 60В°C - High degree of protection IP69K
Item Number:
OBE20M-R101-S2EP-IO-V31-L
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| Process data witdh | Emitter: Process data output: 2 Bit Receiver: Process data input: 2 Bit Process data output: 2 Bit |
| Housing width | 18.3 mm |
| Ambient temperature | -40 ... 60 В°C (-40 ... 140 В°F) |
| Switching type | The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link /Q - Pin2: NPN normally closed / light-on, PNP normally open / dark-on |
| Mass | Emitter: approx. 10 g receiver: approx. 10 g |
| Product standard | EN 60947-5-2 |
| Switching current | max. 100 mA , resistive load |
| Operation indicator | LED green: constantly on - power on flashing (4Hz) - short circuit flashing with short break (1 Hz) - IO-Link mode |
| No-load supply current | Emitter: 13 mA Receiver: 13 mA at 24 V supply voltage |
| Parameterization indicator | IO link communication: green LED goes out briefly (1 Hz) |
| Test input | emitter deactivation at +UB |
| Threshold detection range | 30 m |
| Usage category | DC-12 and DC-13 |
| Housing height | 13.9 mm |
| Ripple | max. 10 % |
| Angle of divergence | approx. 0.3 В° |
| Ambient light limit | EN 60947-5-2 : 30000 Lux |
| Protection class | III |
| Function indicator | Yellow LED: Permanently lit - light path clear Permanently off - object detected Flashing (4 Hz) - insufficient operating reserve |
| Transfer rate | COM 2 (38.4 kBaud) |
| Signal output | 2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected |
| Control elements | Receiver: light/dark switch |
| Emitter | OBE20M-R101-S-IO-V31-L |
| Mission Time (TM) | 20 a |
| Laser safety | EN 60825-1:2014 |
| Switching frequency | 1250 Hz |
| Min. cycle time | 2.3 ms |
| Receiver | OBE20M-R101-2EP-IO-V31-L |
| Control elements | Receiver: sensitivity adjustment |
| Degree of protection | IP67 / IP69 / IP69K |
| Effective detection range | 0 ... 20 m |
| UL approval | E87056 , cULus Listed , class 2 power supply , type rating 1 |
| Storage temperature | -40 ... 70 В°C (-40 ... 158 В°F) |
| Device ID | Emitter: 0x110402 (1115138) Reciever: 0x110302 (1114882) |
| Light source | laser diode |
| SIO mode support | yes |
| Light type | modulated visible red light |
| Housing depth | 33.8 mm |
| Connection | M8 x 1 connector, 4-pin |
| IO-Link Revision | 1.1 |
| Switching voltage | max. 30 V DC |
| Communication interface | IEC 61131-9 |
| Compatible master port type | A |
| Diagnostic Coverage (DC) | 0 % |
| Operating voltage | 10 ... 30 V DC |
| Interface type | IO-Link ( via C/Q = pin 4 ) |
| Response time | 0.4 ms |
| MTTFd | 440 a |
| FDA approval | IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 |
| Diameter of the light spot | approx. 50 mm at a distance of 20 m |
| Voltage drop | 1.5 V DC |
Comments
No comments yet