Pepperl+Fuchs OBE20M-R103-S2EP-IO-V31-L Laser thru-beam sensor

Pepperl+Fuchs OBE20M-R103-S2EP-IO-V31-L
Item Number: OBE20M-R103-S2EP-IO-V31-L
  • Miniature design with versatile mounting options
  • DuraBeam Laser Sensors - durable and employable like an LED
  • IO-link interface for service and process data
  • Various frequencies for avoiding mutual interference (cross-talk immunity)
  • Extended temperature range
    -40В°C ... 60В°C
  • High degree of protection IP69K
Price on Request
Total price: 0.00
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments
Ambient temperature-40 ... 60 В°C (-40 ... 140 В°F)
Housing width15 mm
Mission Time (TM)20 a
Switching frequency1250 Hz
Light typemodulated visible red light
Signal output2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Storage temperature-40 ... 70 В°C (-40 ... 158 В°F)
Product standardEN 60947-5-2
Min. cycle time2.3 ms
Interface typeIO-Link ( via C/Q = pin 4 )
Light sourcelaser diode
Ripplemax. 10 %
Operation indicatorLED green:
constantly on - power on
flashing (4Hz) - short circuit
flashing with short break (1 Hz) - IO-Link mode
Usage categoryDC-12 and DC-13
IO-Link Revision1.1
Effective detection range0 ... 20 m
Transfer rateCOM 2 (38.4 kBaud)
MassEmitter: approx. 12 g receiver: approx. 12 g
Operating voltage10 ... 30 V DC
Device IDEmitter: 0x110404 (1115140)
Receiver: 0x110304 (1114884)
Voltage drop 1.5 V DC
Switching voltagemax. 30 V DC
Response time0.4 ms
Control elementsReceiver: light/dark switch
Degree of protectionIP67 / IP69 / IP69K
Process data witdhEmitter:
Process data output: 2 Bit
Process data input: 2 Bit
Process data output: 2 Bit
Diagnostic Coverage (DC)0 %
Control elementsReceiver: sensitivity adjustment
Function indicatorYellow LED:
Permanently lit - light path clear
Permanently off - object detected
Flashing (4 Hz) - insufficient operating reserve
Housing depth26.7 mm
Communication interfaceIEC 61131-9
FDA approvalIEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Laser safetyEN 60825-1:2014
Compatible master port typeA
Ambient light limitEN 60947-5-2 : 30000 Lux
Switching typeThe switching type of the sensor is adjustable. The default setting is:
C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link
/Q - Pin2: NPN normally closed / light-on, PNP normally open / dark-on
No-load supply currentEmitter: 13 mA
Receiver: 13 mA at 24 V supply voltage
UL approvalE87056 , cULus Listed , class 2 power supply , type rating 1
Threshold detection range30 m
ConnectionM8 x 1 connector, 4-pin
SIO mode supportyes
Housing height43.9 mm
MTTFd440 a
Switching currentmax. 100 mA , resistive load
Diameter of the light spotapprox. 50 mm at a distance of 20 m
Parameterization indicatorIO link communication: green LED goes out briefly (1 Hz)
Protection classIII
Test inputemitter deactivation at +UB
Angle of divergenceapprox. 0.3 В°


No comments yet

Write a comment

in international format without spaces
All fields are required