Pepperl+Fuchs OBE25M-R200-S2EP-IO-V1
Thru-beam sensor
- Medium design with versatile mounting options
- IO-link interface for service and process data
- Various frequencies for avoiding mutual interference (cross-talk immunity)
- Extended temperature range
-40В°C ... 60В°C - High degree of protection IP69K
Item Number:
OBE25M-R200-S2EP-IO-V1
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
Effective detection range | 0 ... 25 m |
Test input | emitter deactivation at +UB |
Storage temperature | -40 ... 70 В°C (-40 ... 158 В°F) |
Emitter | OBE25M-R200-S-IO-V1 |
Operating voltage | 10 ... 30 V DC |
Ripple | max. 10 % |
Housing depth | 41.7 mm |
Degree of protection | IP67 / IP69 / IP69K |
MTTFd | 462 a |
Min. cycle time | 2.3 ms |
Device ID | Emitter: 0x111401 (1119233) Receiver: 0x111301 (1118977) |
Switching frequency | 1000 Hz |
Compatible master port type | A |
Alignment aid | LED red (in receiver lens) illuminated constantly: beam is interrupted, flashes: reaching switching point, off: sufficient stability control |
Receiver | OBE25M-R200-2EP-IO-V1 |
Signal output | 2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected |
Connection | 4-pin, M12 x 1 connector, 90В° rotatable |
Control elements | Receiver: sensitivity adjustment |
Transfer rate | COM 2 (38.4 kBaud) |
Diameter of the light spot | approx. 850 mm at a distance of 25 m |
Diagnostic Coverage (DC) | 60 % |
Light type | modulated visible red light |
Housing width | 15 mm |
Response time | 0.5 ms |
Process data witdh | Emitter: Process data input: 0 bit Process data output: 1 bit Receiver: Process data input: 2 bit Process data output: 2 bit |
Light source | LED |
Protection class | III |
Housing height | 50.6 mm |
Angle of divergence | approx. 2 В° |
CCC approval | CCC approval / marking not required for products rated 36 V |
Mission Time (TM) | 20 a |
Usage category | DC-12 and DC-13 |
No-load supply current | Emitter: 15 mA Receiver: 15 mA at 24 V Operating voltage |
Switching voltage | max. 30 V DC |
Ambient temperature | -40 ... 60 В°C (-40 ... 140 В°F) |
Interface type | IO-Link ( via C/Q = pin 4 ) |
Switching current | max. 100 mA , resistive load |
Function indicator | Yellow LED: Permanently lit - light path clear Permanently off - object detected Flashing (4 Hz) - insufficient operating reserve |
Voltage drop | 1.5 V DC |
UL approval | E87056 , cULus Listed , class 2 power supply , type rating 1 |
Switching type | The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link /Q - Pin2: NPN normally closed / light-on, PNP normally open / dark-on |
LED risk group labelling | exempt group |
Communication interface | IEC 61131-9 |
Mass | Emitter: approx. 37 g receiver: approx. 37 g |
Threshold detection range | 33 m |
Device profile | Identification and diagnosis Smart Sensor: Receiver: type 2.4 Emitter: - |
Ambient light limit | EN 60947-5-2 : 40000 Lux |
Operation indicator | LED green: constantly on - power on flashing (4Hz) - short circuit flashing with short break (1 Hz) - IO-Link mode |
Product standard | EN 60947-5-2 |
Control elements | Receiver: light/dark switch |
SIO mode support | yes |
IO-Link Revision | 1.1 |
People also buy
Comments
No comments yet