Pepperl+Fuchs OBE40M-R200-S2EP-IO-0,3M-V31-L
Laser thru-beam sensor
We ship to United States of America!
- Medium design with versatile mounting options
- DuraBeam Laser Sensors - durable and employable like an LED
- IO-link interface for service and process data
- Various frequencies for avoiding mutual interference (cross-talk immunity)
- Extended temperature range
-40?°C ... 60?°C - High degree of protection IP69K
Item Number:
OBE40M-R200-S2EP-IO-0,3M-V31-L
Delivery standard: 3-6 weeks, depending on the country.
Condition: new
The price and delivery terms is not final. Please check with the manager.
Contact our experts
- Overview +
- Comments +
| Device profile | Identification and diagnosis Smart Sensor: Receiver: type 2.4 Emitter: - |
| Threshold detection range | 50 m |
| Product standard | EN 60947-5-2 |
| Connection | fixed cable 300 mm with M8 x 1 male connector; 4-pin |
| Usage category | DC-12 and DC-13 |
| Receiver | OBE40M-R200-2EP-IO-0,3M-V31-L |
| Housing width | 15 mm |
| Light source | laser diode |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| Laser safety | EN 60825-1:2014 |
| Device ID | Emitter: 0x111402 (1119234) Receiver: 0x111302 (1118978) |
| Process data witdh | Emitter: Process data input: 0 bit Process data output: 1 bit Receiver: Process data input: 2 bit Process data output: 2 bit |
| Ambient light limit | EN 60947-5-2 : 40000 Lux |
| No-load supply current | Emitter: 13 mA Receiver: 15 mA at 24 V Operating voltage |
| Interface type | IO-Link ( via C/Q = pin 4 ) |
| Function indicator | Yellow LED: Permanently lit - light path clear Permanently off - object detected Flashing (4 Hz) - insufficient operating reserve |
| UL approval | E87056 , cULus Listed , class 2 power supply , type rating 1 |
| Control elements | Receiver: light/dark switch |
| Min. cycle time | 2.3 ms |
| Control elements | Receiver: sensitivity adjustment |
| Alignment aid | LED red (in receiver lens) illuminated constantly: beam is interrupted, flashes: reaching switching point, off: sufficient stability control |
| Switching voltage | max. 30 V DC |
| Test input | emitter deactivation at +UB |
| Housing depth | 41.7 mm |
| Compatible master port type | A |
| Switching current | max. 100 mA , resistive load |
| Transfer rate | COM 2 (38.4 kBaud) |
| Operation indicator | LED green: constantly on - power on flashing (4Hz) - short circuit flashing with short break (1 Hz) - IO-Link mode |
| MTTFd | 440 a |
| Operating voltage | 10 ... 30 V DC |
| Mission Time (TM) | 20 a |
| Cable length | 0.3 m |
| Housing height | 50.6 mm |
| Ambient temperature | -40 ... 60 ?°C (-40 ... 140 ?°F) , fixed cable -20 ... 60 ?°C (-4 ... 140 ?°F) , movable cable not appropriate for conveyor chains |
| Signal output | 2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected |
| Diagnostic Coverage (DC) | 60 % |
| Voltage drop | 1.5 V DC |
| Mass | Emitter: approx. 41 g receiver: approx. 41 g |
| Diameter of the light spot | approx. 80 mm at a distance of 40 m |
| FDA approval | IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 |
| Angle of divergence | approx. 0.12 ?° |
| Ripple | max. 10 % |
| IO-Link Revision | 1.1 |
| Emitter | OBE40M-R200-S-IO-0,3M-V31-L |
| Effective detection range | 0 ... 40 m |
| Protection class | III |
| Light type | modulated visible red light |
| Degree of protection | IP67 / IP69 / IP69K |
| Switching frequency | 1250 Hz |
| Communication interface | IEC 61131-9 |
| Switching type | The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link /Q - Pin2: NPN normally closed / light-on, PNP normally open / dark-on |
| Storage temperature | -40 ... 70 ?°C (-40 ... 158 ?°F) |
| SIO mode support | yes |
| Response time | 0.4 ms |
Buy Pepperl+Fuchs OBE40M-R200-S2EP-IO-0,3M-V31-L with the best possible price and delivery terms on eltra-trade.com
Eltra Trade s.r.o. delivers top-quality industrial control products. Our extensive inventory ensures you find the parts you need, with worldwide delivery options. We offer competitive prices and personalized service. Get in touch today to see how we can support your business effectively and efficiently.
Comments
No comments yet