Pepperl+Fuchs OBE40M-R200-S2EP-IO-V31-L Laser thru-beam sensor

Pepperl+Fuchs OBE40M-R200-S2EP-IO-V31-L
Item Number: OBE40M-R200-S2EP-IO-V31-L
  • Medium design with versatile mounting options
  • DuraBeam Laser Sensors - durable and employable like an LED
  • IO-link interface for service and process data
  • Various frequencies for avoiding mutual interference (cross-talk immunity)
  • Extended temperature range
    -40В°C ... 60В°C
  • High degree of protection IP69K
Price on Request
Quantity
-
+
Total price: 0.00
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments
Compatible master port typeA
Response time0.4 ms
Process data witdhEmitter:
Process data input: 0 bit
Process data output: 1 bit
Receiver:
Process data input: 2 bit
Process data output: 2 bit
Test inputemitter deactivation at +UB
Ambient temperature-40 ... 60 В°C (-40 ... 140 В°F)
Min. cycle time2.3 ms
Communication interfaceIEC 61131-9
Diameter of the light spotapprox. 80 mm at a distance of 40 m
Alignment aidLED red (in receiver lens)
illuminated constantly: beam is interrupted,
flashes: reaching switching point,
off: sufficient stability control
Ripplemax. 10 %
Signal output2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Housing height50.6 mm
Control elementsReceiver: light/dark switch
SIO mode supportyes
EmitterOBE40M-R200-S-IO-V31-L
CCC approvalCCC approval / marking not required for products rated 36 V
Function indicatorYellow LED:
Permanently lit - light path clear
Permanently off - object detected
Flashing (4 Hz) - insufficient operating reserve
Housing width15 mm
No-load supply currentEmitter: 13 mA
Receiver: 15 mA at 24 V Operating voltage
FDA approvalIEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
ReceiverOBE40M-R200-2EP-IO-V31-L
Light typemodulated visible red light
Threshold detection range50 m
Effective detection range0 ... 40 m
Usage categoryDC-12 and DC-13
IO-Link Revision1.1
Diagnostic Coverage (DC)60 %
Switching frequency1250 Hz
Storage temperature-40 ... 70 В°C (-40 ... 158 В°F)
Switching typeThe switching type of the sensor is adjustable. The default setting is:
C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link
/Q - Pin2: NPN normally closed / light-on, PNP normally open / dark-on
Operation indicatorLED green:
constantly on - power on
flashing (4Hz) - short circuit
flashing with short break (1 Hz) - IO-Link mode
Switching voltagemax. 30 V DC
Angle of divergenceapprox. 0.12 В°
Interface typeIO-Link ( via C/Q = pin 4 )
Product standardEN 60947-5-2
MTTFd440 a
Connection4-pin, M8 x 1 connector, 90В° rotatable
Device profileIdentification and diagnosis
Smart Sensor:
Receiver: type 2.4
Emitter: -
Protection classIII
Ambient light limitEN 60947-5-2 : 40000 Lux
MassEmitter: approx. 35 g receiver: approx. 35 g
Device IDEmitter: 0x111402 (1119234)
Receiver: 0x111302 (1118978)
Mission Time (TM)20 a
Laser safetyEN 60825-1:2014
Degree of protectionIP67 / IP69 / IP69K
Switching currentmax. 100 mA , resistive load
Light sourcelaser diode
Housing depth41.7 mm
Transfer rateCOM 2 (38.4 kBaud)
Control elementsReceiver: sensitivity adjustment
Operating voltage10 ... 30 V DC
UL approvalE87056 , cULus Listed , class 2 power supply , type rating 1
Voltage drop 1.5 V DC

Comments

No comments yet

Write a comment

captcha
in international format without spaces
All fields are required