Pepperl+Fuchs OBE40M-R200-SEP-IO-0,3M-V3-L Laser thru-beam sensor

Pepperl+Fuchs OBE40M-R200-SEP-IO-0,3M-V3-L
Item Number: OBE40M-R200-SEP-IO-0,3M-V3-L
  • Medium design with versatile mounting options
  • DuraBeam Laser Sensors - durable and employable like an LED
  • IO-link interface for service and process data
  • Various frequencies for avoiding mutual interference (cross-talk immunity)
  • Extended temperature range
    -40В°C ... 60В°C
  • High degree of protection IP69K
Price on Request
Total price: 0.00
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments
Diameter of the light spotapprox. 80 mm at a distance of 40 m
Degree of protectionIP67 / IP69 / IP69K
Device profileIdentification and diagnosis
Smart Sensor:
Receiver: type 2.4
Emitter: -
Threshold detection range50 m
Ambient temperature-40 ... 60 В°C (-40 ... 140 В°F) , fixed cable
-20 ... 60 В°C (-4 ... 140 В°F) , movable cable not appropriate for conveyor chains
CCC approvalCCC approval / marking not required for products rated 36 V
Diagnostic Coverage (DC)60 %
Operating voltage10 ... 30 V DC
Operation indicatorLED green:
constantly on - power on
flashing (4Hz) - short circuit
flashing with short break (1 Hz) - IO-Link mode
Protection classIII
Transfer rateCOM 2 (38.4 kBaud)
SIO mode supportyes
Signal output1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected, overvoltage protected
Switching frequency1250 Hz
Process data witdhEmitter:
Process data input: 0 bit
Process data output: 1 bit
Process data input: 2 bit
Process data output: 2 bit
Mission Time (TM)20 a
Alignment aidLED red (in receiver lens)
illuminated constantly: beam is interrupted,
flashes: reaching switching point,
off: sufficient stability control
UL approvalE87056 , cULus Listed , class 2 power supply , type rating 1
Interface typeIO-Link ( via C/Q = pin 4 )
Device IDEmitter: 0x111402 (1119234)
Receiver: 0x111302 (1118978)
MassEmitter: approx. 41 g receiver: approx. 41 g
Effective detection range0 ... 40 m
Control elementsReceiver: sensitivity adjustment
Switching voltagemax. 30 V DC
Function indicatorYellow LED:
Permanently lit - light path clear
Permanently off - object detected
Flashing (4 Hz) - insufficient operating reserve
Light typemodulated visible red light
MTTFd440 a
Voltage drop 1.5 V DC
Ambient light limitEN 60947-5-2 : 40000 Lux
Min. cycle time2.3 ms
Storage temperature-40 ... 70 В°C (-40 ... 158 В°F)
Communication interfaceIEC 61131-9
Switching typeThe switching type of the sensor is adjustable. The default setting is:
C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link
Housing height50.6 mm
Laser safetyEN 60825-1:2014
Usage categoryDC-12 and DC-13
Product standardEN 60947-5-2
Angle of divergenceapprox. 0.12 В°
Compatible master port typeA
Connection300 mm fixed cable with M8 x 1, 3-pin connector
Switching currentmax. 100 mA , resistive load
Control elementsReceiver: light/dark switch
Test inputemitter deactivation at +UB
Housing width15 mm
Cable length0.3 m
No-load supply currentEmitter: 13 mA
Receiver: 15 mA at 24 V Operating voltage
IO-Link Revision1.1
Ripplemax. 10 %
FDA approvalIEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Housing depth41.7 mm
Response time0.4 ms
Light sourcelaser diode


No comments yet

Write a comment

in international format without spaces
All fields are required