Pepperl+Fuchs OBE40M-R201-SEP-IO-V3-L Laser thru-beam sensor

Pepperl+Fuchs OBE40M-R201-SEP-IO-V3-L
Item Number: OBE40M-R201-SEP-IO-V3-L
  • Medium design with versatile mounting options
  • DuraBeam Laser Sensors - durable and employable like an LED
  • IO-link interface for service and process data
  • Various frequencies for avoiding mutual interference (cross-talk immunity)
  • Extended temperature range
    -40В°C ... 60В°C
  • High degree of protection IP69K
Price on Request
Quantity
-
+
Total price: 0.00
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments
Switching typeThe switching type of the sensor is adjustable. The default setting is:
C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link
UL approvalE87056 , cULus Listed , class 2 power supply , type rating 1
Control elementsReceiver: light/dark switch
Storage temperature-40 ... 70 В°C (-40 ... 158 В°F)
EmitterOBE40M-R201-S-IO-V3-L
Protection classIII
FDA approvalIEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Alignment aidLED red (in receiver lens)
illuminated constantly: beam is interrupted,
flashes: reaching switching point,
off: sufficient stability control
Switching currentmax. 100 mA , resistive load
Laser safetyEN 60825-1:2014
Housing depth41.7 mm
Signal output1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected, overvoltage protected
Light typemodulated visible red light
ConnectionConnector plug, M8 x 1, 3 pin, rotatable by 90В°
MassEmitter: approx. 44 g receiver: approx. 44 g
Mission Time (TM)20 a
ReceiverOBE40M-R201-EP-IO-V3-L
Ripplemax. 10 %
SIO mode supportyes
Transfer rateCOM 2 (38.4 kBaud)
Operating voltage10 ... 30 V DC
Test inputemitter deactivation at +UB
Diagnostic Coverage (DC)60 %
Compatible master port typeA
Housing height61.7 mm
Ambient temperature-40 ... 60 В°C (-40 ... 140 В°F)
Switching voltagemax. 30 V DC
Angle of divergenceapprox. 0.12 В°
Voltage drop 1.5 V DC
Housing width15 mm
Device IDEmitter: 0x111412 (1119250)
Receiver: 0x111312 (1118994)
No-load supply currentEmitter: 13 mA
Receiver: 15 mA at 24 V Operating voltage
Effective detection range0 ... 40 m
Min. cycle time2.3 ms
MTTFd440 a
Degree of protectionIP67 / IP69 / IP69K
Interface typeIO-Link ( via C/Q = pin 4 )
Usage categoryDC-12 and DC-13
Light sourcelaser diode
Diameter of the light spotapprox. 80 mm at a distance of 40 m
CCC approvalCCC approval / marking not required for products rated 36 V
Operation indicatorLED green:
constantly on - power on
flashing (4Hz) - short circuit
flashing with short break (1 Hz) - IO-Link mode
IO-Link Revision1.1
Control elementsReceiver: sensitivity adjustment
Response time0.4 ms
Switching frequency1250 Hz
Ambient light limitEN 60947-5-2 : 40000 Lux
Function indicatorYellow LED:
Permanently lit - light path clear
Permanently off - object detected
Flashing (4 Hz) - insufficient operating reserve
Process data witdhEmitter:
Process data input: 0 bit
Process data output: 1 bit
Receiver:
Process data input: 2 bit
Process data output: 2 bit
Product standardEN 60947-5-2
Communication interfaceIEC 61131-9
Threshold detection range50 m
Device profileIdentification and diagnosis
Smart Sensor:
Receiver: type 2.4
Emitter: -

Comments

No comments yet

Write a comment

captcha
in international format without spaces
All fields are required