Pepperl+Fuchs OBE500-R2F-SE0
Thru-beam sensor (pair)
- Very flat design for direct mounting without mounting bracket
- Very bright, highly visible light spot
Item Number:
OBE500-R2F-SE0
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Datasheet
- Alternative numbers
- Comments
| Operating voltage | 10 ... 30 V DC |
| Voltage drop | ≤ 1.5 V DC |
| Switching type | NO contact / dark on |
| No-load supply current | < 10 mA |
| Test input | Test of switching function at 0 V |
| Object size | typ. starts from 1.5 mm |
| Storage temperature | -20 ... 70 В°C (-4 ... 158 В°F) |
| Housing height | 25.5 mm |
| Effective detection range | 0 ... 500 mm |
| Diagnostic Coverage (DC) | 0 % |
| Threshold detection range | 700 mm |
| Signal output | 1 NPN output, short-circuit protected, reverse polarity protected, open collector |
| Mission Time (TM) | 20 a |
| Light source | LED |
| Angle of divergence | approx. 5 В° |
| Receiver | OBE500-R2F-E0 |
| Switching frequency | approx. 1 kHz |
| Protection class | III |
| Ambient temperature | -20 ... 60 В°C (-4 ... 140 В°F) |
| MTTFd | 806 a |
| Diameter of the light spot | approx. 90 mm at a distance of 500 mm |
| Housing depth | 4.1 mm |
| Angle deviation | approx. 2 В° |
| Product standard | EN 60947-5-2 |
| Operation indicator | LED green, statically lit Power on , short-circuit : LED green flashing (approx. 4 Hz) |
| Switching voltage | max. 30 V DC |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Response time | 500 µs |
| Switching current | max. 50 mA , resistive load |
| Function indicator | Receiver: LED yellow, lights up when light beam is free, flashes when falling short of the stability control ; OFF when light beam is interrupted |
| Optical face | frontal |
| LED risk group labelling | exempt group |
| Connection | 2 m fixed cable |
| Tightening torque, fastening screws | 0.25 Nm |
| Cable length | 2 m |
| Emitter | OBE500-R2F-S |
| Light type | modulated visible red light , 630 nm |
| Ambient light limit | EN 60947-5-2 : 25000 Lux |
| UL approval | E87056 , cULus Recognized, Class 2 Power Source |
| Degree of protection | IP67 |
| Mass | approx. 20 g Per sensor |
| Housing width | 12 mm |
Comments
No comments yet