Pepperl+Fuchs OBG4000-R103-2EP-IO-V31 Retroreflective sensor (glass)
Item Number: OBG4000-R103-2EP-IO-V31
- Miniature design with versatile mounting options
- Detects transparent objects, i.e., clear glass, PET and transparent films
- Two machines in one: clear object detection or reflection operating mode with long range
- High degree of protection IP69K
- IO-link interface for service and process data
- Overview
- Datasheet
- Alternative numbers
- Comments
Product standardEN 60947-5-2
| Signal output | 2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected |
| Reflector distance | 0 ... 3.5 m in TEACH mode ; 0 ... 4 m at switch position ""N"" |
| Usage category | DC-12 and DC-13 |
| Protection class | III |
| Angle of divergence | approx. 5 В° |
| Response time | 1 ms |
| Light source | LED |
| Reference target | H85-2 reflector |
| Voltage drop | 1.5 V DC |
| Mass | approx. 12 g |
| Ambient temperature | -20 ... 60 В°C (-4 ... 140 В°F) |
| Ripple | max. 10 % |
| Process data witdh | Process data input 2 Bit Process data output 2 Bit |
| IO-Link Revision | 1.1 |
| Housing depth | 26.7 mm |
| Diagnostic Coverage (DC) | 0 % |
| Degree of protection | IP67 / IP69K |
| No-load supply current | < 25 mA at 24 V supply voltage |
| Operating voltage | 10 ... 30 V DC |
| Switching current | max. 100 mA , resistive load |
| Interface type | IO-Link ( via C/Q = pin 4 ) |
| Function indicator | Yellow LED: Permanently lit - light path clear Permanently off - object detected Flashing (4 Hz) - insufficient operating reserve |
| Transfer rate | COM 2 (38.4 kBaud) |
| Min. cycle time | 2.3 ms |
| Mission Time (TM) | 20 a |
| Switching frequency | 500 Hz |
| MTTFd | 600 a |
| Connection | M8 x 1 connector, 4-pin |
| Device ID | 0x110A03 (1116675) |
| Operation indicator | LED green: constantly on - power on flashing (4Hz) - short circuit flashing with short break (1 Hz) - IO-Link mode |
| Control elements | Teach-In key |
| Threshold detection range | 5 m |
| Effective detection range | 0 ... 3.5 m in TEACH mode ; 0 ... 4 m at switch position ""N"" |
| SIO mode support | yes |
| Compatible master port type | A |
| Housing height | 43.9 mm |
| Communication interface | IEC 61131-9 |
| UL approval | E87056 , cULus Listed , class 2 power supply , type rating 1 |
| Control elements | 5-step rotary switch for operating modes selection |
| Ambient light limit | EN 60947-5-2 |
| LED risk group labelling | exempt group |
| Light type | modulated visible red light |
| Switching voltage | max. 30 V DC |
| Storage temperature | -40 ... 70 В°C (-40 ... 158 В°F) |
| Contrast detection levels | 10 % - clean, water filled PET bottles 18 % - clear glass bottles 40 % - colored glass or opaque materials Adjustable via rotary switch |
| Diameter of the light spot | approx. 170 mm at a distance of 3.5 m |
| Switching type | The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link /Q - Pin2: NPN normally closed / light-on, PNP normally open / dark-on |
| Housing width | 15 mm |
Comments
No comments yet