Pepperl+Fuchs OBG5000-R101-2P1-IO-V31
Retroreflective sensor (glass)
- Miniature design with versatile mounting options
- Detects transparent objects, i.e., clear glass, PET and transparent films
- Two machines in one: clear object detection or reflection operating mode with long range
- High degree of protection IP69K
- IO-link interface for service and process data
Item Number:
OBG5000-R101-2P1-IO-V31
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
Connection | M8 x 1 connector, 4-pin |
Interface type | IO-Link ( via C/Q = pin 4 ) |
Usage category | DC-12 and DC-13 |
LED risk group labelling | exempt group |
IO-Link Revision | 1.1 |
Housing height | 39.5 mm |
Light type | modulated visible red light |
Ambient temperature | -20 ... 60 В°C (-4 ... 140 В°F) |
Device ID | 0x110A09 (1116681) |
Storage temperature | -40 ... 70 В°C (-40 ... 158 В°F) |
Light source | LED |
Transfer rate | COM 2 (38.4 kBaud) |
Switching frequency | 500 Hz |
Operation indicator | LED green: constantly on - power on flashing (4Hz) - short circuit flashing with short break (1 Hz) - IO-Link mode |
Reflector distance | 0 ... 5 m |
Switching current | max. 100 mA , resistive load |
Voltage drop | 1.5 V DC |
UL approval | E87056 , cULus Listed , class 2 power supply , type rating 1 |
Ambient light limit | EN 60947-5-2 |
Threshold detection range | 6 m |
Reference target | H85-2 reflector |
Compatible master port type | A |
Diameter of the light spot | approx. 170 mm at a distance of 3.5 m |
Ripple | max. 10 % |
Effective detection range | 0 ... 5 m |
Angle of divergence | approx. 5 В° |
Mass | approx. 10 g |
Signal output | 2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected |
Switching voltage | max. 30 V DC |
Degree of protection | IP67 / IP69 / IP69K |
SIO mode support | yes |
Diagnostic Coverage (DC) | 0 % |
Housing width | 13.9 mm |
No-load supply current | < 25 mA at 24 V supply voltage |
MTTFd | 600 a |
Response time | 1 ms |
Process data witdh | Process data input 2 Bit Process data output 2 Bit |
Function indicator | Yellow LED: Permanently lit - light path clear Permanently off - object detected Flashing (4 Hz) - insufficient operating reserve |
Mission Time (TM) | 20 a |
Operating voltage | 10 ... 30 V DC |
Switching type | The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally closed / light-on, PNP normally open / dark-on, IO-Link /Q - Pin2: NPN normally open / dark-on, PNP normally closed / light-on |
Min. cycle time | 2.3 ms |
Protection class | III |
Communication interface | IEC 61131-9 |
Housing depth | 18.3 mm |
Product standard | EN 60947-5-2 |
People also buy
Comments
No comments yet