Pepperl+Fuchs OBP120-R100-2EP-IO-V31-L
Trigger marks sensor

Pepperl+Fuchs OBP120-R100-2EP-IO-V31-L
  • Miniature design with versatile mounting options
  • For detecting black trigger marks on a white background
  • DuraBeam Laser Sensors - durable and employable like an LED
  • Extended temperature range
    -40В°C ... 60В°C
  • High degree of protection IP69K
  • IO-link interface for service and process data
Item Number: OBP120-R100-2EP-IO-V31-L
281.50
-
+
Total price: 281.50
The price is not final. Please check with the manager!
Contact our experts
  • Overview
  • Comments
Switching frequency3300 Hz
Device profileSmart Sensor
UL approvalE87056 , cULus Listed , class 2 power supply , type rating 1
Protection classIII
Ripplemax. 10 %
IO-Link Revision1.1
Switching currentmax. 100 mA , resistive load
Control elementsTeach-In key
Storage temperature-40 ... 70 В°C (-40 ... 158 В°F)
Interface typeIO-Link ( via C/Q = pin 4 )
Transfer rateCOM 2 (38.4 kBaud)
Optical resolutionTrigger mark [black, 6%] of 1 mm-wide on a white background [white, 90%]; Contrast difference of min. 50%
Rated operating voltage10 ... 30 V DC
Housing width11 mm
Usage categoryDC-12 and DC-13
Product standardEN 60947-5-2
Degree of protectionIP67 / IP69 / IP69K
Response time125 micro/s
Angle of divergenceapprox. 0.3 В°
MTTFd560 a
Detection range25 ... 120 mm
Switching voltagemax. 30 V DC
Control elements5-step rotary switch for operating modes selection
Teach-Instatic and dynamic Teach-In
Housing height44.5 mm
Ambient light limitEN 60947-5-2 : 40000 Lux
ConnectionM8 x 1 connector, 4-pin
Min. cycle time2.3 ms
Adjustment range25 ... 120 mm
Pollution degree3
Mission Time (TM)20 a
Ambient temperature-40 ... 60 В°C (-40 ... 140 В°F)
Laser safetyEN 60825-1:2014
Process data witdhProcess data input 1 Bit
Process data output 2 Bit
No-load supply current< 20 mA at 24 V supply voltage
Switching typeThe switching type of the sensor is adjustable. The default setting is:
C/Q - Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link
/Q - Pin2: NPN normally closed / dark-on, PNP normally open / light-on
Voltage drop 1.5 V DC
Housing depth21.5 mm
Massapprox. 10 g
Diagnostic Coverage (DC)0 %
Light sourcelaser diode
Function indicatorLED yellow:
constantly on - object detected
constantly off - object not detected
SIO mode supportyes
Light typemodulated visible red light
Device ID0x110C01 (1117185)
Operation indicatorLED green:
constantly on - power on
flashing (4Hz) - short circuit
flashing with short break (1 Hz) - IO-Link mode
FDA approvalIEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Compatible master port typeA
Diameter of the light spot< 1 mm at a distance of 60 mm
Signal output2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Communication interfaceIEC 61131-9
Reference targetstandard white, 100 mm x 100 mm

Comments

No comments yet

Write a comment