Pepperl+Fuchs OBR25M-R200-2EP-IO-L
Laser retroreflective sensor
- Medium design with versatile mounting options
- DuraBeam Laser Sensors - durable and employable like an LED
- Extended temperature range
-40В°C ... 60В°C - High degree of protection IP69K
- IO-link interface for service and process data
Item Number:
OBR25M-R200-2EP-IO-L
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
Switching type | The switching type of the sensor is adjustable. The default setting is: C/Q - BK: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link /Q - WH: NPN normally closed / light-on, PNP normally open / dark-on |
Effective detection range | 0 ... 25 m |
Housing width | 15 mm |
Diagnostic Coverage (DC) | 0 % |
Ripple | max. 10 % |
Threshold detection range | 33 m |
Degree of protection | IP67 / IP69 / IP69K |
Light type | modulated visible red light |
Control elements | Light-on/dark-on changeover switch |
Diameter of the light spot | approx. 50 mm at a distance of 25 m |
Communication interface | IEC 61131-9 |
Interface type | IO-Link ( via C/Q = BK ) |
Light source | laser diode |
UL approval | E87056 , cULus Listed , class 2 power supply , type rating 1 |
Ambient light limit | EN 60947-5-2 : 60000 Lux |
Reflector distance | 0.5 ... 25 m |
Cable length | 2 m |
Compatible master port type | A |
Signal output | 2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected |
Min. cycle time | 2.3 ms |
Polarization filter | yes |
Reference target | H85-2 reflector |
Operation indicator | LED green: constantly on - power on flashing (4Hz) - short circuit flashing with short break (1 Hz) - IO-Link mode |
Protection class | III |
Function indicator | Yellow LED: Permanently lit - light path clear Permanently off - object detected Flashing (4 Hz) - insufficient operating reserve |
Transfer rate | COM 2 (38.4 kBaud) |
Mission Time (TM) | 20 a |
Device ID | 0x111202 (1118722) |
Device profile | Identification and diagnosis Smart Sensor type 2.4 |
FDA approval | IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 |
Connection | 2 m fixed cable |
Response time | 250 micro/s |
Ambient temperature | -40 ... 60 В°C (-40 ... 140 В°F) , fixed cable -20 ... 60 В°C (-4 ... 140 В°F) , movable cable not appropriate for conveyor chains |
Angle of divergence | approx. 0.1 В° |
IO-Link Revision | 1.1 |
Usage category | DC-12 and DC-13 |
Operating voltage | 10 ... 30 V DC |
Laser safety | EN 60825-1:2014 |
Storage temperature | -40 ... 70 В°C (-40 ... 158 В°F) |
Housing depth | 41.7 mm |
Switching frequency | 2000 Hz |
SIO mode support | yes |
No-load supply current | < 15 mA at 24 V Operating voltage |
Process data witdh | Process data input 2 Bit Process data output 2 Bit |
Switching current | max. 100 mA , resistive load |
CCC approval | CCC approval / marking not required for products rated 36 V |
Control elements | sensitivity adjustment |
Housing height | 50.6 mm |
Product standard | EN 60947-5-2 |
Mass | approx. 73 g |
MTTFd | 672 a |
Voltage drop | 1.5 V DC |
Switching voltage | max. 30 V DC |
People also buy
Comments
No comments yet