Pepperl+Fuchs OBR7000-R100-2EP-IO-1R-IR
Retroreflective sensor

Pepperl+Fuchs OBR7000-R100-2EP-IO-1R-IR
  • Miniature design with versatile mounting options
  • Extended temperature range
    -40В°C ... 60В°C
  • High degree of protection IP69K
  • IO-link interface for service and process data
Item Number: OBR7000-R100-2EP-IO-1R-IR
Total price: 87.91
The price is not final. Please check with the manager!
Contact our experts
  • Overview
  • Comments
Control elementssensitivity adjustment
Interface typeIO-Link ( via C/Q = pin 4 )
Storage temperature-40 ... 70 В°C (-40 ... 158 В°F)
Switching frequency1000 Hz
Polarization filterno
No-load supply current< 25 mA at 24 V supply voltage
Cable length2 m
Ripplemax. 10 %
Housing width11 mm
Min. cycle time2.3 ms
Signal output2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Device ID0x110201 (1114625)
Parameterization indicatorIO link communication: green LED goes out briefly (1 Hz)
Angle of divergence5.4 В°
Usage categoryDC-12 and DC-13
SIO mode supportyes
Communication interfaceIEC 61131-9
Transfer rateCOM 2 (38.4 kBaud)
Switching voltagemax. 30 V DC
Compatible master port typeA
LED risk group labellingexempt group
Degree of protectionIP67 / IP69 / IP69K
Housing depth21.5 mm
Ambient light limitEN 60947-5-2
Control elementsLight-on/dark-on changeover switch
Switching typeThe switching type of the sensor is adjustable. The default setting is:
C/Q - BK: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link
/Q - WH: NPN normally closed / light-on, PNP normally open / dark-on
MTTFd724 a
Reference targetH85-2 reflector
Response time0.5 ms
Operating voltage10 ... 30 V DC
Ambient temperature-40 ... 60 В°C (-40 ... 140 В°F) , fixed cable
-25 ... 60 В°C (-13 ... 140 В°F) , movable cable not appropriate for conveyor chains
Voltage drop 1.5 V DC
Protection classIII
Massapprox. 36 g
Reflector distance0.03 ... 7 m
Light typemodulated infrared light 850 nm
Connection2 m fixed cable
Diameter of the light spotapprox. 100 mm at a distance of 1 m
Switching currentmax. 100 mA , resistive load
Threshold detection range10 m
Diagnostic Coverage (DC)0 %
Operation indicatorLED green:
constantly on - power on
flashing (4Hz) - short circuit
flashing with short break (1 Hz) - IO-Link mode
UL approvalE87056 , cULus Listed , class 2 power supply , type rating 1
Process data witdhProcess data input 2 Bit
Process data output 2 Bit
Mission Time (TM)20 a
Effective detection range0 ... 7 m
Housing height37.1 mm
Product standardEN 60947-5-2
Light sourceLED
Function indicatorYellow LED:
Permanently lit - light path clear
Permanently off - object detected
Flashing (4 Hz) - insufficient operating reserve
IO-Link Revision1.1


No comments yet

Write a comment