Pepperl+Fuchs OBR7500-R100-2EP-IO-0,3M-V1
Retroreflective sensor
- Miniature design with versatile mounting options
- Extended temperature range
-40В°C ... 60В°C - High degree of protection IP69K
- IO-link interface for service and process data
Item Number:
OBR7500-R100-2EP-IO-0,3M-V1
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| Light type | modulated visible red light |
| Parameterization indicator | IO link communication: green LED goes out briefly (1 Hz) |
| Housing height | 37.1 mm |
| Threshold detection range | 10 m |
| Polarization filter | yes |
| Storage temperature | -40 ... 70 В°C (-40 ... 158 В°F) |
| Connection | 300 mm fixed cable with M12 x 1, 4-pin connector |
| Ambient temperature | -40 ... 60 В°C (-40 ... 140 В°F) , fixed cable -25 ... 60 В°C (-13 ... 140 В°F) , movable cable not appropriate for conveyor chains |
| Ripple | max. 10 % |
| Usage category | DC-12 and DC-13 |
| Min. cycle time | 2.3 ms |
| Voltage drop | 1.5 V DC |
| UL approval | E87056 , cULus Listed , class 2 power supply , type rating 1 |
| Interface type | IO-Link ( via C/Q = pin 4 ) |
| Switching current | max. 100 mA , resistive load |
| MTTFd | 724 a |
| Diameter of the light spot | approx. 65 mm at a distance of 1 m |
| Light source | LED |
| Product standard | EN 60947-5-2 |
| Signal output | 2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected |
| Angle of divergence | 3.7 В° |
| Control elements | Light-on/dark-on changeover switch |
| Effective detection range | 0 ... 7.5 m |
| Reference target | H85-2 reflector |
| Switching frequency | 1000 Hz |
| IO-Link Revision | 1.1 |
| Operating voltage | 10 ... 30 V DC |
| Protection class | III |
| Ambient light limit | EN 60947-5-2 |
| Function indicator | Yellow LED: Permanently lit - light path clear Permanently off - object detected Flashing (4 Hz) - insufficient operating reserve |
| LED risk group labelling | exempt group |
| Reflector distance | 0.03 ... 7.5 m |
| Compatible master port type | A |
| Mass | approx. 21 g |
| Response time | 0.5 ms |
| Housing width | 11 mm |
| Device ID | 0x110201 (1114625) |
| SIO mode support | yes |
| Diagnostic Coverage (DC) | 0 % |
| Communication interface | IEC 61131-9 |
| Cable length | 0.3 m |
| Housing depth | 21.5 mm |
| Degree of protection | IP67 / IP69 / IP69K |
| Control elements | sensitivity adjustment |
| Switching voltage | max. 30 V DC |
| Operation indicator | LED green: constantly on - power on flashing (4Hz) - short circuit flashing with short break (1 Hz) - IO-Link mode |
| Switching type | The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link /Q - Pin2: NPN normally closed / light-on, PNP normally open / dark-on |
| Process data witdh | Process data input 2 Bit Process data output 2 Bit |
| Mission Time (TM) | 20 a |
| Transfer rate | COM 2 (38.4 kBaud) |
| No-load supply current | < 25 mA at 24 V supply voltage |
Comments
No comments yet