Pepperl+Fuchs OBR7500-R100-EP-IO-0,3M-V3
Retroreflective sensor
- Miniature design with versatile mounting options
- Extended temperature range
-40В°C ... 60В°C - High degree of protection IP69K
- IO-link interface for service and process data
Item Number:
OBR7500-R100-EP-IO-0,3M-V3
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
Housing width | 11 mm |
Mission Time (TM) | 20 a |
Parameterization indicator | IO link communication: green LED goes out briefly (1 Hz) |
Operation indicator | LED green: constantly on - power on flashing (4Hz) - short circuit flashing with short break (1 Hz) - IO-Link mode |
Min. cycle time | 2.3 ms |
Voltage drop | 1.5 V DC |
Mass | approx. 15 g |
Device ID | 0x110201 (1114625) |
Compatible master port type | A |
Threshold detection range | 10 m |
Light type | modulated visible red light |
Diagnostic Coverage (DC) | 0 % |
Reflector distance | 0.03 ... 7.5 m |
Reference target | H85-2 reflector |
Ambient light limit | EN 60947-5-2 |
Process data witdh | Process data input 2 Bit Process data output 2 Bit |
Connection | 300 mm fixed cable with M8 x 1, 3-pin connector |
Usage category | DC-12 and DC-13 |
Diameter of the light spot | approx. 65 mm at a distance of 1 m |
Signal output | 1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected, overvoltage protected |
Degree of protection | IP67 / IP69 / IP69K |
Switching frequency | 1000 Hz |
Switching current | max. 100 mA , resistive load |
Control elements | sensitivity adjustment |
Switching type | The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link |
IO-Link Revision | 1.1 |
Interface type | IO-Link ( via C/Q = pin 4 ) |
Control elements | Light-on/dark-on changeover switch |
Communication interface | IEC 61131-9 |
Operating voltage | 10 ... 30 V DC |
Response time | 0.5 ms |
LED risk group labelling | exempt group |
Storage temperature | -40 ... 70 В°C (-40 ... 158 В°F) |
Polarization filter | yes |
Switching voltage | max. 30 V DC |
UL approval | E87056 , cULus Listed , class 2 power supply , type rating 1 |
Housing height | 37.1 mm |
Function indicator | Yellow LED: Permanently lit - light path clear Permanently off - object detected Flashing (4 Hz) - insufficient operating reserve |
Light source | LED |
Ripple | max. 10 % |
Protection class | III |
MTTFd | 724 a |
SIO mode support | yes |
Transfer rate | COM 2 (38.4 kBaud) |
Cable length | 0.3 m |
Angle of divergence | 3.7 В° |
No-load supply current | < 25 mA at 24 V supply voltage |
Product standard | EN 60947-5-2 |
Housing depth | 21.5 mm |
Ambient temperature | -40 ... 60 В°C (-40 ... 140 В°F) , fixed cable -25 ... 60 В°C (-13 ... 140 В°F) , movable cable not appropriate for conveyor chains |
Effective detection range | 0 ... 7.5 m |
People also buy
Comments
No comments yet