Pepperl+Fuchs OBT40-R102-2P1-IO-IR Triangulation sensor (BGS)
Item Number: OBT40-R102-2P1-IO-IR
- Miniature design with versatile mounting options
- Best background suppressor in its class
- Precision object detection, almost irrespective of the color
- Extended temperature range
-40В°C ... 60В°C - High degree of protection IP69K
- IO-link interface for service and process data
- Overview
- Datasheet
- Alternative numbers
- Comments
| Switching voltage | max. 30 V DC |
| Detection range max. | 10 ... 50 mm |
| Response time | 1 ms |
| Storage temperature | -40 ... 70 В°C (-40 ... 158 В°F) |
| Interface type | IO-Link ( via C/Q = BK ) |
| Housing depth | 18.3 mm |
| LED risk group labelling | exempt group |
| Compatible master port type | A |
| Min. cycle time | 2.3 ms |
| Ambient light limit | EN 60947-5-2 : 40000 Lux |
| Voltage drop | 1.5 V DC |
| Transfer rate | COM 2 (38.4 kBaud) |
| Connection | 2 m fixed cable |
| Operating voltage | 10 ... 30 V DC |
| No-load supply current | < 25 mA at 24 V supply voltage |
| Reference target | standard white, 100 mm x 100 mm |
| Black/White difference (6 %/90 %) | approx. 1 mm |
| Angle of divergence | approx. 5 В° |
| Switching current | max. 100 mA , resistive load |
| Ripple | max. 10 % |
| Usage category | DC-12 and DC-13 |
| Device ID | 0x11051A (1115418) |
| Light type | modulated infrared light 850 nm |
| Protection class | III |
| Device profile | Smart Sensor |
| Switching type | C/Q - Pin4: NPN normally closed / dark-on, PNP normally open / light-on, IO-Link /Q - Pin2: NPN normally open / light-on, PNP normally closed / dark-on |
| Ambient temperature | -40 ... 60 В°C (-40 ... 140 В°F) , fixed cable -25 ... 60 В°C (-13 ... 140 В°F) , movable cable not appropriate for conveyor chains |
| Product standard | EN 60947-5-2 |
| Housing width | 13.9 mm |
| Diameter of the light spot | approx. 3 mm at 40 mm |
| Switching frequency | 500 Hz |
| MTTFd | 600 a |
| SIO mode support | yes |
| Function indicator | LED yellow: constantly on - object detected constantly off - object not detected |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Signal output | 2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected |
| Cable length | 2 m |
| Communication interface | IEC 61131-9 |
| Detection range | 10 ... 40 mm |
| Housing height | 31.9 mm |
| IO-Link Revision | 1.1 |
| Mass | approx. 36 g |
| Process data witdh | Process data input 1 Bit Process data output 2 Bit |
| Background suppression | starts from 50 mm |
| Light source | LED |
| UL approval | E87056 , cULus Listed , class 2 power supply , type rating 1 |
| Operation indicator | LED green: constantly on - power on flashing (4Hz) - short circuit flashing with short break (1 Hz) - IO-Link mode |
| Degree of protection | IP67 / IP69 / IP69K |
Comments
No comments yet