Pepperl+Fuchs OBT600-R201-2EP-IO-0,3M-V31-L Triangulation sensor (BGS)

Pepperl+Fuchs OBT600-R201-2EP-IO-0,3M-V31-L
Item Number: OBT600-R201-2EP-IO-0,3M-V31-L
  • Medium design with versatile mounting options
  • DuraBeam Laser Sensors - durable and employable like an LED
  • Extended temperature range
    -40В°C ... 60В°C
  • High degree of protection IP69K
  • IO-link interface for service and process data
Price on Request
Quantity
-
+
Total price: 0.00
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments
Connectionfixed cable 300 mm with M8 x 1 male connector; 4-pin
Operation indicatorLED green:
constantly on - power on
flashing (4Hz) - short circuit
flashing with short break (1 Hz) - IO-Link mode
Mission Time (TM)20 a
Angle of divergenceapprox. 0.3 В°
Adjustment range90 ... 600 mm
CCC approvalCCC approval / marking not required for products rated 36 V
Switching typeThe switching type of the sensor is adjustable. The default setting is:
C/Q - Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link
/Q - Pin2: NPN normally closed / dark-on, PNP normally open / light-on
MTTFd560 a
Detection range max.40 ... 600 mm
Product standardEN 60947-5-2
Device ID0x111613 (1119763)
Diagnostic Coverage (DC)0 %
Switching frequency1650 Hz
UL approvalE87056 , cULus Listed , class 2 power supply , type rating 1
Storage temperature-40 ... 70 В°C (-40 ... 158 В°F)
Detection range min.40 ... 90 mm
Cable length0.3 m
Light typemodulated visible red light
No-load supply current< 15 mA at 24 V supply voltage
Black/White difference (6 %/90 %)< 5 % at 300 mm
Detection range40 ... 600 mm
Laser safetyEN 60825-1:2014
Min. cycle time2.3 ms
Housing depth41.7 mm
Diameter of the light spotapprox. 2.5 mm at a distance of 600 mm
Operating voltage10 ... 30 V DC
Ambient light limitEN 60947-5-2 : 70000 Lux
Signal output2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Function indicatorLED yellow:
constantly on - object detected
constantly off - object not detected
IO-Link Revision1.1
Control elementsSensing range adjuster
Switching voltagemax. 30 V DC
Light sourcelaser diode
Reference targetstandard white, 100 mm x 100 mm
Ambient temperature-40 ... 60 В°C (-40 ... 140 В°F) , fixed cable
-20 ... 60 В°C (-4 ... 140 В°F) , movable cable not appropriate for conveyor chains
SIO mode supportyes
Ripplemax. 10 %
Housing width15 mm
FDA approvalIEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Interface typeIO-Link ( via C/Q = pin 4 )
Protection classIII
Control elementsLight-on/dark-on changeover switch
Usage categoryDC-12 and DC-13
Process data witdhProcess data input 1 Bit
Process data output 2 Bit
Device profileIdentification and diagnosis
Smart Sensor type 2.4
Massapprox. 52 g
Degree of protectionIP67 / IP69 / IP69K
Response time300 micro/s
Housing height61.7 mm
Voltage drop 1.5 V DC
Communication interfaceIEC 61131-9
Switching currentmax. 100 mA , resistive load
Transfer rateCOM 2 (38.4 kBaud)
Compatible master port typeA

Comments

No comments yet

Write a comment

captcha
in international format without spaces
All fields are required