Pepperl+Fuchs OBT600-R201-2EP-IO-1T-L-Y0247 Triangulation sensor (BGE)

Pepperl+Fuchs OBT600-R201-2EP-IO-1T-L-Y0247
Item Number: OBT600-R201-2EP-IO-1T-L-Y0247
  • Medium design with versatile mounting options
  • Secure and gapless detection, even near the surface through background evaluation
  • DuraBeam Laser Sensors - durable and employable like an LED
  • Extended temperature range
    -40В°C ... 60В°C
  • High degree of protection IP69K
  • IO-link interface for service and process data
Price on Request
Quantity
-
+
Total price: 0.00
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments
Control elementsSensing range adjuster
Ripplemax. 10 %
Switching typeThe switching type of the sensor is adjustable. The default setting is:
C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link
/Q - Pin2: NPN normally closed / light-on, PNP normally open / dark-on
Degree of protectionIP67 / IP69 / IP69K
No-load supply current< 15 mA at 24 V supply voltage
Storage temperature-40 ... 70 В°C (-40 ... 158 В°F)
CCC approvalCCC approval / marking not required for products rated 36 V
FDA approvalIEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Min. cycle time2.3 ms
Compatible master port typeA
SIO mode supportyes
Mission Time (TM)20 a
Black/White difference (6 %/90 %)< 5 % at 300 mm
Device ID0x111713 (1120019)
Cable length0.3 m
Switching currentmax. 100 mA , resistive load
Operation indicatorLED green:
constantly on - power on
flashing (4Hz) - short circuit
flashing with short break (1 Hz) - IO-Link mode
Switching voltagemax. 30 V DC
Housing width15 mm
Light sourcelaser diode
Interface typeIO-Link ( via C/Q = pin 4 )
Detection range max.40 ... 600 mm
IO-Link Revision1.1
Detection range min.40 ... 90 mm
Product standardEN 60947-5-2
Voltage drop 1.5 V DC
Diagnostic Coverage (DC)0 %
Signal output2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Communication interfaceIEC 61131-9
Operating voltage10 ... 30 V DC
Housing height61.7 mm
Angle of divergenceapprox. 0.3 В°
MTTFd560 a
Control elementsLight-on/dark-on changeover switch
Function indicatorLED yellow:
constantly on - background detected (object not detected)
constantly off - object detected
Transfer rateCOM 2 (38.4 kBaud)
Laser safetyEN 60825-1:2014
Device profileIdentification and diagnosis
Smart Sensor type 2.4
Connectionfixed cable 300 mm with M8 x 1 male connector; 4-pin
Diameter of the light spotapprox. 2.5 mm at a distance of 600 mm
Reference targetstandard white, 100 mm x 100 mm
UL approvalE87056 , cULus Listed , class 2 power supply , type rating 1
Ambient temperature-40 ... 60 В°C (-40 ... 140 В°F) , fixed cable
-25 ... 60 В°C (-13 ... 140 В°F) , movable cable not appropriate for conveyor chains
Massapprox. 52 g
Usage categoryDC-12 and DC-13
Protection classIII
Adjustment range90 ... 600 mm
Response time300 micro/s
Process data witdhProcess data input 1 Bit
Process data output 2 Bit
Housing depth41.7 mm
Switching frequency1650 Hz
Detection range40 ... 600 mm
Ambient light limitEN 60947-5-2 : 70000 Lux
Light typemodulated visible red light

Comments

No comments yet

Write a comment

captcha
in international format without spaces
All fields are required