Pepperl+Fuchs OCT300-M1K-N2
Diffuse mode sensor
- ATEX-, IECEX approval for zone 20 (Dust) and zone 1 (Gas)
- Intrinsically safe, Ex op is ia IIC T6 Gb/IIIC T 135 В°C Da
- Adjustable sensor head
- Scratch resistant mineral glass lens
Item Number:
OCT300-M1K-N2
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| Connection | M16 terminal compartment, core cross section ≤ 2.5 mm2 |
| Housing height | 30 mm |
| Product standard | EN 60947-5-2 |
| Ambient light limit | ≤ 40000 Lux sun light ≤ 30000 Lux halogen light |
| Effective internal inductance Li | negligibly small |
| MTTFd | 1319 a |
| Standards | EN 60079-0:2012+A11:2013 EN 60079-11:2012 EN 60079-28:2007 |
| Applicant | Pepperl+Fuchs GmbH, Lilienthalstrasse 200, 68307 Mannheim, Germany |
| Installation, commissioning | The associated apparatus must, as a minimum, fulfill the requirements for degree of protection ia and for Groups II or III, as appropriate for the operating conditions. Due to the possible risk of ignition that can occur as a result of faults and/or transient currents in the equipotential bonding system, galvanic isolation in the supply and signal current circuit is preferred. Associated apparatus without galvanic isolation may only be used if the appropriate requirements as set out in IEC 60079-14 are met. This certificate does not guarantee that the components installed in the partition isolate the zones completely from one another. Appropriate measures must be taken when the partition is set up to ensure the zones are completely isolated. |
| CE marking | CE0102 |
| Switching frequency | ≤ 100 Hz |
| Effective internal capacitance Ci | max. 75 nF |
| Effective internal capacitance Ci | max. 75 nF |
| Storage temperature | -40 ... 80 В°C (-40 ... 176 В°F) |
| Ambient temperature | The temperature ranges, according to temperature class, are given in the EC-Type Examination Certificate. |
| Mission Time (TM) | 20 a |
| Signal output | 1 NAMUR output NC/NO programmable |
| Maintenance | No modifications must be undertaken on apparatus, which is operated in hazardous areas. Repairs to such apparatus are not permissible. |
| Diagnostic Coverage (DC) | 0 % |
| Maintenance | No modifications must be undertaken on apparatus, which is operated in hazardous areas. Repairs to such apparatus are not permissible. |
| Effective internal inductance Li | negligibly small |
| CE marking | CE0102 |
| Maintenance | No modifications must be undertaken on apparatus, which is operated in hazardous areas. Repairs to such apparatus are not permissible. |
| Detection range | 0 ... 300 mm |
| Installation, commissioning | The associated apparatus must, as a minimum, fulfill the requirements for degree of protection ia and for Groups II or III, as appropriate for the operating conditions. Due to the possible risk of ignition that can occur as a result of faults and/or transient currents in the equipotential bonding system, galvanic isolation in the supply and signal current circuit is preferred. Associated apparatus without galvanic isolation may only be used if the appropriate requirements as set out in IEC 60079-14 are met. This certificate does not guarantee that the components installed in the partition isolate the zones completely from one another. Appropriate measures must be taken when the partition is set up to ensure the zones are completely isolated. |
| General | The apparatus must be operated in accordance with the data provided in the data sheet and this operating instruction. In particular, the maximum rated voltage and the temperature range must be adhered to. The special conditions must be adhered to! The EU-type examination certificate has to be observed. |
| Switching voltage | 8 V DC (Ri approx. 1 kΩ) |
| Light source | IRED , 880 nm |
| IECEx marking | Ex ia IIIC T135В°C Da |
| Switching type | light/dark on, programmable |
| Effective internal capacitance Ci | max. 1200 nF |
| Control elements | Sensing range adjuster |
| Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
| Maintenance | No modifications must be undertaken on apparatus, which is operated in hazardous areas. Repairs to such apparatus are not permissible. |
| Effective internal capacitance Ci | max. 1200 nF |
| Effective internal inductance Li | negligibly small |
| EC-Type Examination Certificate | ZELM 03 ATEX 0196 X |
| Directive conformity | 2014/34/EU |
| Applicant | Pepperl+Fuchs GmbH, Lilienthalstrasse 200, 68307 Mannheim, Germany |
| ATEX marking | Zone 20/21: |
| Adjustment range | 70 ... 300 mm |
| Installation, commissioning | The associated apparatus must, as a minimum, fulfill the requirements for degree of protection ia and for Groups II or III, as appropriate for the operating conditions. Due to the possible risk of ignition that can occur as a result of faults and/or transient currents in the equipotential bonding system, galvanic isolation in the supply and signal current circuit is preferred. Associated apparatus without galvanic isolation may only be used if the appropriate requirements as set out in IEC 60079-14 are met. The intrinsic safety is only assured in connection with an appropriate related apparatus and according to the proof of intrinsic safety. |
| Time delay before availability | 20 ms |
| ATEX marking | Zone 1: |
| Temperature influence | ≤ 0.5 mm/K |
| General | The apparatus must be operated in accordance with the data provided in the data sheet and this operating instruction. In particular, the maximum rated voltage and the temperature range must be adhered to. The special conditions must be adhered to! The IECEx certificate must be observed. |
| General | The apparatus must be operated in accordance with the data provided in the data sheet and this operating instruction. In particular, the maximum rated voltage and the temperature range must be adhered to. The special conditions must be adhered to! The EU-type examination certificate has to be observed. |
| Standards | IEC 60079-0:2011 IEC 60079-11:2011 IEC 60079-28:2006 |
| Installation, commissioning | The associated apparatus must, as a minimum, fulfill the requirements for degree of protection ia and for Groups II or III, as appropriate for the operating conditions. Due to the possible risk of ignition that can occur as a result of faults and/or transient currents in the equipotential bonding system, galvanic isolation in the supply and signal current circuit is preferred. Associated apparatus without galvanic isolation may only be used if the appropriate requirements as set out in IEC 60079-14 are met. The intrinsic safety is only assured in connection with an appropriate related apparatus and according to the proof of intrinsic safety. |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
| Effective internal inductance Li | negligibly small |
| Applicant | Pepperl+Fuchs GmbH, Lilienthalstrasse 200, 68307 Mannheim, Germany |
| Operating voltage | 6 ... 20 V DC (Ri approx. 0 Ohm) |
| Ambient temperature | The temperature ranges, according to temperature class, are given in the EC-Type Examination Certificate. |
| Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
| Applicant | Pepperl+Fuchs GmbH, Lilienthalstrasse 200, 68307 Mannheim, Germany |
| Housing width | 30 mm |
| Light type | modulated infrared light |
| Repeat accuracy | ≤ 0.5 % of the sensing range |
| Mass | 100 g |
| Ripple | 5 % |
| Standards | EN 60079-0:2012+A11:2013 EN 60079-11:2012 EN 60079-28:2007 |
| Reference target | standard white 200 mm x 200 mm |
| General | The apparatus must be operated in accordance with the data provided in the data sheet and this operating instruction. In particular, the maximum rated voltage and the temperature range must be adhered to. The special conditions must be adhered to! The IECEx certificate must be observed. |
| IECEx marking | Zone 1: |
| Certificate number | IECEx PTB 12.0060 X |
| Housing depth | 102 mm |
| EC-Type Examination Certificate | PTB 01 ATEX 2203 X |
| Function indicator | LED yellow: switching state |
| Standards | IEC 60079-0:2011 IEC 60079-11:2011 |
| Certificate number | IECEx ZLM 12.0005X |
| Response time | 5 ms |
| Degree of protection | IP67 |
| Directive conformity | 2014/34/EU |
Comments
No comments yet