Pepperl+Fuchs OMT100-R100-2EP-IO-0,3M-V1-L
Distance sensor

Pepperl+Fuchs OMT100-R100-2EP-IO-0,3M-V1-L
  • Miniature design with versatile mounting options
  • Space-saving distance sensors in small standardized design
  • Multi Pixel Technology (MPT) - exact and precise signal evaluation
  • DuraBeam Laser Sensors - durable and employable like an LED
  • IO-link interface for service and process data
Item Number: OMT100-R100-2EP-IO-0,3M-V1-L
358.80
-
+
Total price: 358.80
The price is not final. Please check with the manager!
Contact our experts
  • Overview
  • Comments
Compatible master port typeA
Device profileSmart Sensor
Angle of divergenceapprox. 2 В°
Resolution0.1 mm
Storage temperature-40 ... 70 В°C (-40 ... 158 В°F)
Housing width11 mm
Laser safetyEN 60825-1:2014
Diagnostic Coverage (DC)0 %
Massapprox. 17 g
Reference targetstandard white, 100 mm x 100 mm
Ambient temperature10 ... 60 В°C (50 ... 140 В°F)
Device ID0x110904 (1116420)
IO-Link Revision1.1
Angle deviationmax. +/- 1.5 В°
Control elements5-step rotary switch for operating modes selection
FDA approvalIEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Operating voltage10 ... 30 V DC
Warm up time5 min
Switching typeThe default setting is:
C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link
Q2 - Pin2: NPN normally open, PNP normally closed
No-load supply current< 25 mA at 24 V supply voltage
Response time2 ms
Temperature drift0.03 %/K
Measurement range40 ... 100 mm
Protection classIII
Signal output2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Transfer rateCOM 2 (38.4 kBaud)
Voltage drop 1.5 V DC
Communication interfaceIEC 61131-9
Function indicatorLED yellow:
constantly on - switch output active
constantly off - switch output inactive
Ripplemax. 10 %
Ambient light limitEN 60947-5-2 : 30000 Lux
Interface typeIO-Link ( via C/Q = pin 4 )
Light typemodulated visible red light
Mission Time (TM)20 a
UL approvalE87056 , cULus Listed , class 2 power supply , type rating 1
Connection300 mm fixed cable with M12 x 1, 4-pin connector
Housing height44.5 mm
Usage categoryDC-12 and DC-13
Switching voltagemax. 30 V DC
Housing depth21.5 mm
Switching currentmax. 100 mA , resistive load
SIO mode supportyes
Cable length0.3 m
Diameter of the light spotapprox. 3 mm at a distance of 100 mm
Operation indicatorLED green:
constantly on - power on
flashing (4Hz) - short circuit
flashing with short break (1 Hz) - IO-Link mode
Control elementsTeach-In key
Light sourcelaser diode
Min. cycle time3 ms
Process data witdhProcess data input 3 Byte
Process data output 2 Bit
Linearity errorВ± 0,75 %
MTTFd560 a
Product standardEN 60947-5-2
Repeat accuracy 0.5 %
Degree of protectionIP67 / IP69 / IP69K

Comments

No comments yet

Write a comment