Pepperl+Fuchs OMT100-R103-2EP-IO-V31 Distance sensor

Pepperl+Fuchs OMT100-R103-2EP-IO-V31
Item Number: OMT100-R103-2EP-IO-V31
  • Miniature design with versatile mounting options
  • Space-saving distance sensors in small standardized design
  • Multi Pixel Technology (MPT) - exact and precise signal evaluation
  • IO-link interface for service and process data
Price on Request
Quantity
-
+
Total price: 0.00
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments
Ripplemax. 10 %
Min. cycle time3 ms
UL approvalE87056 , cULus Listed , class 2 power supply , type rating 1
Voltage drop 1.5 V DC
Compatible master port typeA
Housing height43.9 mm
Light sourceLED
Protection classIII
Mission Time (TM)20 a
Switching voltagemax. 30 V DC
Switching currentmax. 100 mA , resistive load
Response time2 ms
Process data witdhProcess data input 3 Byte
Process data output 2 Bit
IO-Link Revision1.1
Device profileSmart Sensor
Light typemodulated visible red light
Operating voltage10 ... 30 V DC
Resolution0.1 mm
ConnectionM8 x 1 connector, 4-pin
Housing depth26.7 mm
Interface typeIO-Link ( via C/Q = pin 4 )
SIO mode supportyes
Degree of protectionIP67 / IP69 / IP69K
Repeat accuracy 0.5 %
Diagnostic Coverage (DC)0 %
Transfer rateCOM 2 (38.4 kBaud)
Control elements5-step rotary switch for operating modes selection
Angle deviationmax. +/- 1.5 В°
Control elementsTeach-In key
No-load supply current< 25 mA at 24 V supply voltage
Reference targetstandard white, 100 mm x 100 mm
Usage categoryDC-12 and DC-13
Ambient light limitEN 60947-5-2 : 30000 Lux
Ambient temperature10 ... 60 В°C (50 ... 140 В°F)
Diameter of the light spotapprox. 8 mm at a distance of 100 mm
Operation indicatorLED green:
constantly on - power on
flashing (4Hz) - short circuit
flashing with short break (1 Hz) - IO-Link mode
Massapprox. 12 g
Housing width15 mm
Linearity errorВ± 0,75 %
Product standardEN 60947-5-2
Angle of divergenceapprox. 4 В°
Warm up time5 min
Communication interfaceIEC 61131-9
Storage temperature-40 ... 70 В°C (-40 ... 158 В°F)
LED risk group labellingexempt group
Device ID0x110909 (1116425)
Function indicatorLED yellow:
constantly on - switch output active
constantly off - switch output inactive
Measurement range40 ... 100 mm
Temperature drift0.03 %/K
Switching typeThe default setting is:
C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link
Q2 - Pin2: NPN normally open, PNP normally closed
Signal output2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected
MTTFd600 a

Comments

No comments yet

Write a comment

in international format without spaces
All fields are required