Pepperl+Fuchs OMT200-R100-2EP-IO-V31
Distance sensor
- Miniature design with versatile mounting options
- Space-saving distance sensors in small standardized design
- Multi Pixel Technology (MPT) - exact and precise signal evaluation
- IO-link interface for service and process data
Item Number:
OMT200-R100-2EP-IO-V31
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
Process data witdh | Process data input 3 Byte Process data output 2 Bit |
Protection class | III |
Repeat accuracy | 1 % |
Device ID | 0x110905 (1116421) |
MTTFd | 600 a |
Compatible master port type | A |
Angle deviation | max. +/- 1.5 В° |
Storage temperature | -40 ... 70 В°C (-40 ... 158 В°F) |
Switching type | The default setting is: C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link Q2 - Pin2: NPN normally open, PNP normally closed |
Light type | modulated visible red light |
Ripple | max. 10 % |
Communication interface | IEC 61131-9 |
Connection | M8 x 1 connector, 4-pin |
Ambient light limit | EN 60947-5-2 : 30000 Lux |
Interface type | IO-Link ( via C/Q = pin 4 ) |
Voltage drop | 1.5 V DC |
LED risk group labelling | exempt group |
Housing depth | 21.5 mm |
Linearity error | В± 1 % |
Switching current | max. 100 mA , resistive load |
Diagnostic Coverage (DC) | 0 % |
Ambient temperature | 10 ... 60 В°C (50 ... 140 В°F) |
Measurement range | 60 ... 200 mm |
Mission Time (TM) | 20 a |
Switching voltage | max. 30 V DC |
Function indicator | LED yellow: constantly on - switch output active constantly off - switch output inactive |
Diameter of the light spot | approx. 12 mm at a distance of 200 mm |
Angle of divergence | 4 В° |
Operation indicator | LED green: constantly on - power on flashing (4Hz) - short circuit flashing with short break (1 Hz) - IO-Link mode |
Min. cycle time | 3 ms |
SIO mode support | yes |
Degree of protection | IP67 / IP69 / IP69K |
Signal output | 2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected |
Product standard | EN 60947-5-2 |
Temperature drift | 0.05 %/K |
Housing height | 44.5 mm |
UL approval | E87056 , cULus Listed , class 2 power supply , type rating 1 |
Housing width | 11 mm |
Mass | approx. 10 g |
Operating voltage | 10 ... 30 V DC |
Light source | LED |
Control elements | 5-step rotary switch for operating modes selection |
Warm up time | 5 min |
Usage category | DC-12 and DC-13 |
Reference target | standard white, 100 mm x 100 mm |
Response time | 2 ms |
Resolution | 0.1 mm |
Transfer rate | COM 2 (38.4 kBaud) |
IO-Link Revision | 1.1 |
No-load supply current | < 25 mA at 24 V supply voltage |
Device profile | Smart Sensor |
Control elements | Teach-In key |
People also buy
Comments
No comments yet